|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
#1
|
|||
|
|||
Dante Virtual Soundcard - MTRX Studio Setup
Hey all,
I'm just in the set-up stage of installing a new MTRX Studio, I'm trying to get system audio into the MTRX through Dante Virtual Soundcard but I'm having a hard time. I think I have a clocking issue between DVS and the MTRX? DVS is showing muted in Dante Controller. I can't figure out where to go, or what to do. There's very limited information around. Any help is appreciated,
__________________
Pro Tools 2024.3.0|Perpetual MTRX Studio HDX1 Sync-X S3 Dock Mac Mini 2018 - 3.2GHz i7 6-core macOS 13.6 RAM 64GB DDR4 GPU AMD 6900XT 16GB Monitor LG 32UL950-W |
#2
|
||||
|
||||
Re: Dante Virtual Soundcard - MTRX Studio Setup
If you are using a 10G Ethernet port in your 2018 Mac Mini this is likely the issue (known) with Dante Virtual Soundcard. Use an adapter like the Belkin:
https://www.apple.com/shop/product/H...hernet-adapter That should sort it. best, Jeff |
#3
|
|||
|
|||
Re: Dante Virtual Soundcard - MTRX Studio Setup
Ah excellent!
Thanks for the heads-up. Will Eucon still work if it isn't connected to the switch?
__________________
Pro Tools 2024.3.0|Perpetual MTRX Studio HDX1 Sync-X S3 Dock Mac Mini 2018 - 3.2GHz i7 6-core macOS 13.6 RAM 64GB DDR4 GPU AMD 6900XT 16GB Monitor LG 32UL950-W |
#5
|
|||
|
|||
Re: Dante Virtual Soundcard - MTRX Studio Setup
Just went out and bought the adapter, plugged it in, and now DADman doesn't see the MTRX. I've tried a DHCP connection, and a static IP.
__________________
Pro Tools 2024.3.0|Perpetual MTRX Studio HDX1 Sync-X S3 Dock Mac Mini 2018 - 3.2GHz i7 6-core macOS 13.6 RAM 64GB DDR4 GPU AMD 6900XT 16GB Monitor LG 32UL950-W |
#6
|
||||
|
||||
Re: Dante Virtual Soundcard - MTRX Studio Setup
Make sure you see virtual LED life under System Preferences > Network for the Belkin. If a router, you should see green + an IP in the correct range. If no router, you should see amber + a 169 self assigned address range. If you've rejiggered everything and kept the MTRX ST on, you should power it off and then back on.
In DADman, access Settings > Device List to see the IP addresses of the detected MTRX devices. Right click on the detected device and access Network Settings to ensure you have it configured the way you want - DHCP vs Manual. Jeff |
#7
|
|||
|
|||
Re: Dante Virtual Soundcard - MTRX Studio Setup
Thanks for your help with this Jeff, both DVS and DADman can now see the MTRX. However, DVS is still showing 'clock sync unlocked'.
__________________
Pro Tools 2024.3.0|Perpetual MTRX Studio HDX1 Sync-X S3 Dock Mac Mini 2018 - 3.2GHz i7 6-core macOS 13.6 RAM 64GB DDR4 GPU AMD 6900XT 16GB Monitor LG 32UL950-W |
#8
|
||||
|
||||
Re: Dante Virtual Soundcard - MTRX Studio Setup
Screenshots might help. Is the MTRX Studio set to be the leader clock? Dante Controller > Clock Status view.
DVS = 4.1.2.3 Dante Controller = 4.4.0.8 MTRX ST: cpufw = 1.0.3.2 DADman = 5.4.5.1 Jeff |
#9
|
|||
|
|||
Re: Dante Virtual Soundcard - MTRX Studio Setup
__________________
Pro Tools 2024.3.0|Perpetual MTRX Studio HDX1 Sync-X S3 Dock Mac Mini 2018 - 3.2GHz i7 6-core macOS 13.6 RAM 64GB DDR4 GPU AMD 6900XT 16GB Monitor LG 32UL950-W |
#10
|
||||
|
||||
Re: Dante Virtual Soundcard - MTRX Studio Setup
Which adapter are you using? That doesn't look anything like the Belkin which should be labeled Belkin (see below). Your issue is likely the adapter:
https://www.audinate.com/learning/fa...nte-controller Here's what the Belkin USB-C should look like: https://www.dropbox.com/s/7h4e6oebih...elkin.png?dl=0 Jeff |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MTRX Studio and Dante Virtual Soundcard | Ooptron | Pro Tools | MTRX & MTRX Studio | 13 | 07-14-2021 10:50 AM |
MTRX Studio and Dante Virtual Soundcard | Ooptron | Pro Tools | MTRX & MTRX Studio | 0 | 05-31-2021 02:36 AM |
MTRX Studio and DANTE virtual sound card | alvarodeiscar | Pro Tools | MTRX & MTRX Studio | 12 | 10-12-2020 01:57 PM |
Dante Virtual Soundcard | Mike Dy | Digidesign Hardware & Software | 12 | 08-21-2018 04:55 PM |
Anyone using Dante Virtual Soundcard? | Rockman413 | Pro Tools 12 | 16 | 11-10-2017 04:26 AM |