DADman channel selection

[foret_sombre]

Is there a way to solo one monitoring channel on the DADman ?
In 5.1 I can easily mute the four channels I don't want, but with 20+ channels it gets tedious.

[creativecontrol]

Greetings,

Software only DADman or do you have a EUCON, MOM or Streamdeck possibility as well?

If software only, use the Settings > Monitor Profile > Fold down - to facilitate quickly soloing common groups of speakers (elevation, quad, etc.)


best,


Jeff

[foret_sombre]

Thanks for your answer.

I need it to work with a S6 master module.

[creativecontrol]

This is what I would do.

https://www.dropbox.com/scl/fi/305rx...pze8qkzpr&dl=0


Access Control Room from the lower right quadrant Soft Keys on the Automation Module.
Press Spkrs
Press Spkrs+
Press Sum - this then turns into InterCancel
Push for the Speaker you want to isolate.
Push InterCancel to go back to Sum
Push All On to turn all of the speakers back on.

If you simply want to quickly isolate common sets of speakers - use the Fold down preset tip as well.

best,


Jeff