Re: expand faders quick question
Greetings,
Are you running EUCON version 21.6 or later? If so, your existing Expand Fader maps will need to be recreated - from the Master Module by first Attentioning the function (Insert > Parameters for example) then touching the Fader Module (illuminates in purple) to designate the section to map.
If you are using a dedicated On Attention Expand Fader zone - ensure a few things:
The Expand Fader Zone is not suspended.
If the On Attention Function is set to "Inserts Any" - make sure the Inserts chain is not collapsed on the function scroller.
Let us know what you find.
Jeff
|