No, Adding an IO such as an HD IO or OMNI doesn't help you since there is no path to the Renderer which is usually MADI or Dante.
The MTRX or MTRX Studio systems allow you to patch in the FPGA from Pro Tools (DigiLink) to MADI or Dante -> to feed up to 128 channels into a Dolby Renderer running DAMS. The returns come back into the MTRX FPGA which can either be monitored or sent back into a Recorder (MTRX) via DigiLink to ingest Re-Renders.
Jeff
Quote:
Originally Posted by beatlogik
Is it safe to assume that it is also possible to achieve this by adding an HDIO or Omni to a MTRX or MTRX Studio HDX2 system?
Each card connected to both digilink ports on two Avid devices? The MTRX installation documentation shows this with a MTRX and a MADI IO but does not comment on total number of routable tracks.
By this logic one could also assume that HDX3 and three Avid interfaces would give you 192 channels that could be routed to Dante within DADman if using a MTRX equipped with the 64 Dante chip and the 128 channel expansion card.
|