|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
HD OMNI stand-alone without PT running
Is it possible to route audio from the analog inputs to the outputs without Pro Tools running?
__________________
PT Ultimate 2022.10.0 | HD OMNI | S3 | PT Dock | EuControl 2022.4.0.78 | PT Control 2022.4.0.60 macOS Big Sur 11.6.5 | Mac Pro (2019), 3,2 GHz 16-Core Intel Xeon W, 384 GB 2933 MHz DDR4 |
#2
|
||||
|
||||
Re: HD OMNI stand-alone without PT running
Yes indeed. That's why the OMNI has an integrated mixer. As shown below (pulled from the HD Omni Guide).
You can find more details in the guide here: http://akmedia.digidesign.com/suppor..._v90_69707.pdf best, Jeff |
#3
|
|||
|
|||
Re: HD OMNI stand-alone without PT running
Thanks a lot, Jeff!
__________________
PT Ultimate 2022.10.0 | HD OMNI | S3 | PT Dock | EuControl 2022.4.0.78 | PT Control 2022.4.0.60 macOS Big Sur 11.6.5 | Mac Pro (2019), 3,2 GHz 16-Core Intel Xeon W, 384 GB 2933 MHz DDR4 |
#4
|
||||
|
||||
Re: HD OMNI stand-alone without PT running
One of my favorite things about the Omni!
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#5
|
|||
|
|||
Re: HD OMNI stand-alone without PT running
Is it possible to access the mixer without PT running, too?
__________________
PT Ultimate 2022.10.0 | HD OMNI | S3 | PT Dock | EuControl 2022.4.0.78 | PT Control 2022.4.0.60 macOS Big Sur 11.6.5 | Mac Pro (2019), 3,2 GHz 16-Core Intel Xeon W, 384 GB 2933 MHz DDR4 |
#6
|
||||
|
||||
Re: HD OMNI stand-alone without PT running
To clarify the HD Omni guide as shown is a bit confusing it states using it to pass audio from CD player to monitors (which one would assume is audio in straight through to audio out) ??? BUT because in the lightbulb "hint" just below the Hardware Mixer Tab states using it as a stand alone "converter" not wether or not it will pass audio straight through ?
Here is my issue I ended up with two OMNI's. (So I will designate them A (main) and B (standalone) BUT unfortunately PT will not allow me to connect the via digilink expansion port . Like other AVID I/O devices, and have it show as a second OMNI or I/O So what I would like to do is to be able to use it (B) as a stand alone mic pre to add two more mic inputs and outputs to my system, Use Audio 1-2 (mic pres) on it (B) and then route via line out 1/4 it into analog 3-4 line in of my main OMNI (A) running PT... IS this possible ? If I set it up as per the shown mixer setup ? I am assuming I would have to first digilink it (B) to my computer (as if were the main OMNI) and set this up then switch the digilink back to (A) And use it "standalone" from it's mon outs on (B) to go into the 3-4 Audio line in's on my (A) OMNI ?
__________________
System : Studio - Avid Carbon interface , PT Ultimate 2023.12 Mid 2020 (intel) iMac 27" Ventura 13.2 .1 Mobile - 2021 14 " MBP M1 Pro PT Ultimate 2024.3.0 --Sonoma 14.4 Enjoy the Journey.... Kev... Last edited by K Roche; 02-12-2020 at 06:21 AM. |
#7
|
||||
|
||||
Re: HD OMNI stand-alone without PT running
Theoretically yes, but why would you have two as only one ÓMNI can be preent in DigiLink chain when you run PT... what did I miss here?
__________________
Janne What we do in life, echoes in eternity. |
#8
|
|||
|
|||
Re: HD OMNI stand-alone without PT running
And it sample rate converts the SPdif optical port. Amazing.
__________________
Brandon Howlett Vibe Audio Post, Inc. Re-recording Mixer Custom Build CPU, HDX 1, Omni, 192 I/O Digital S6 M10 24 fader Satellite Mac Pro, HDNative, 192 I/0 Black Magic HD Extreme |
#9
|
||||
|
||||
Re: HD OMNI stand-alone without PT running
Yes, run "AvidAudioServerLauncher" which launches "AvidAudioServer". You get the Hardware Setup window without Pro Tools being open.
Applications > Avid > AvidAudioServer >
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#10
|
|||
|
|||
Re: HD OMNI stand-alone without PT running
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just bought an HD Omni. Does Avid offer free support to get me up and running? | rcd | Pro Tools 10 | 7 | 05-08-2017 03:58 PM |
Omni vs HD 8x8x8 io and Omni Pre's | Southsidemusic | Pro Tools HDX & HD Native Systems (Mac) | 13 | 03-27-2013 01:00 AM |
Dual Boot 10.6 running 8HD & 10.7 running 10HD | STL Audio | macOS | 3 | 04-14-2012 05:38 AM |
OMNI Fried? Calling Omni Members - Check High Samplerates | KingFish | Pro Tools TDM Systems (Mac) | 3 | 11-03-2011 09:19 PM |
Be aware! Potential HD Omni buyers with treated Rooms and Computers. Omni Noisy Fan | FRaNCo MuSiC | Pro Tools HDX & HD Native Systems (Win) | 0 | 09-25-2011 05:42 AM |