Dante and AES67

[Pythagor]

Hi Guys,
maybe a stupid question, but i'm buying MTRX base unit and will need both Dante and AES67 protocols to be sent from it. I wonder can i do it with 64-channel Dante card? I will not need more then 40 channels in total.
Any help is highly appreciated

Cheers

[creativecontrol]

Yes you can do a combination of Dante and AES67 from the same box. AES67 uses 8 channel flows. What devices will you be connecting for use with AES67?


Jeff



Sent from my iPhone using Tapatalk Pro

[megatracks]

Apologize for hijacking this convo. I’ll be using Axia xNodes will these devices work with my MTRX’s? What do I need to do to set up. Thanks Jeff.


Avid S6M40-32-5D, MTRX (2), Barefoot MM26, PT Ultimate HDX3, CB TMC1 S6 Penta

[Pythagor]

Originally Posted by creativecontrol

Yes you can do a combination of Dante and AES67 from the same box. AES67 uses 8 channel flows. What devices will you be connecting for use with AES67?


Jeff



Sent from my iPhone using Tapatalk Pro

Ideally yes. I would like to connect a Dante-to-analog box and DMA24302 in the same time

[ntp-jl]

Originally Posted by megatracks

Apologize for hijacking this convo. I’ll be using Axia xNodes will these devices work with my MTRX’s? What do I need to do to set up. Thanks Jeff.


Avid S6M40-32-5D, MTRX (2), Barefoot MM26, PT Ultimate HDX3, CB TMC1 S6 Penta

I tested this in May last year and got it working. I haven't tested it since then so I don't know how newer xNode firmware performs.

AES67 can be quite tricky to work so you will need some patience to make it work.

[creativecontrol]

Here’s a Practical Guide on AES67 that I believe Merging put together.

https://www.dropbox.com/s/q248reg4ue...Guide.pdf?dl=0


best,


Jeff



Sent from my iPhone using Tapatalk Pro

[Pythagor]

Great manual! Thanks you. Unfortunately as i just learned, DMA has its own "DMA AES67" because it was developed at the time when AES67 was not fully established. Anybody has an actual experience of connecting MTRX to DMA directly?
Thanks