|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#11
|
|||
|
|||
Re: MTRX 2 Dante error at startup
Quote:
When I was a support agent for a hardware manufacturer the overwhelming number of issues we saw were related to network configuration or lack thereof. What is the network topology? (as in describe how everything is connected, in as much detail as you can list) What networking equipment (switch/router etc) are you using and is it configured as per Audinate's recommendations? Are you connecting the MTRX II and MTRX I over Dante or are you using Dadlink, MADI, and/or workclock for sync? Is EEE off, are you using QoS, is Dante segregated from other data or is it all on the same LAN/subnet? (Not all of these are 100% necessary but you can start to figure out what is going on) Is Eucon (if you are using) running on its own network? I had a few issues with the D128 card in the MTRX II with the older (MTRX II) firmware but otherwise it has been very stable. Hope you get it sorted.
__________________
James Richmond https://www.jamesrichmond.com 2019 Mac Pro, 2022 Mac Studio Ultra Avid S6, HDX2, MTRX II, MTRX, DAD AX64, AX32, Focusrite Rednet PCIER, Trinnov MC8 Pro. Studio: https://www.voltperoctave.com | Music: https://www.euclideancircuits.com Latest Article: Auto-Bounce for Logic Pro Affiliate Links: Auto-Bounce by Tom Salta Dreamhost Web Hosting Last edited by uptheoctave; 11-30-2023 at 08:27 AM. |
#12
|
||||
|
||||
Re: MTRX 2 Dante error at startup
It is an hardware issue... for sure, even unplugged it still has an Dante in "Error"
After the latest firmware update my thunderbolt also becomes unstable... So sometimes in Dadman I dont see the Mtrx2 at all, after a view reboots it's there, but Dante can still be in "Error". In Dadman it states: "The dante interface is in an unknown enrollment state" The Dante Name is empty while its been saved with a name and Dante IP is manually while its been saved with dhcp. When the dante section comes alive its states the name correct and is at dhcp. But there is definitly something wrong with this board. Also noticed a blank space in the device list which states OK ? (below my ad mic card) Anybody knows what that is about? I'm not taking it on a live event this weekend, glad I didnt trade my old mtrx. Have swapped the AD and DA cards back and gone do the recording with my old trusted mtrx. Too bad... Johnny Hulst
__________________
PT Ultimate 2024.03.0, Avid S1, Eucon 2023.11 16" MacBookPro (2023) M2 Max 12-core, 64gb Ram, 1Tb SSD, OSX 14.4.1 MTRX v.2.4.2.2 + dante card + madi baseunit + optical SFP 1300nm MTRX-II v.1.0.5.2 + TB3 + 1x AD mic 8ch + 1x DA 8ch + madi baseunit + optical SFP 1300nm MOM v.1.0.1.4 by DAD Genelec 1237A Sam, Avantone active mixcubes LA2a (1968), 1073 pre/eq, Neve RNHP, Wacom Intuos Pro Furman P1400 AR E Power conditioner Live-rack: 1x HD Native TB, 4x 192 I/O (64ch AD) 8x Yamaha HA-8 micpre, Rosendahl mif4, Genelec 1031A, Presonus Monitor Station Last edited by Johnny Hulst; 12-06-2023 at 07:21 AM. Reason: got a reply from Jeff |
#13
|
|||
|
|||
Re: MTRX 2 Dante error at startup
Quote:
The first thing to notice is the firmware version for your Dante board. See where it says FPGA 0.0.0.0. I noticed that happened with my AX64 today and it has happened a couple of times in the past too. I did a hard restart (pulled power cable, reconnected, turned device on) and it went away. I am still thinking this is more likely to be firmware than hardware, given I had the same issue with the AX64, but not so far with the MTRX II. But it could be a separate issue presenting similarly in each of our devices. it has only happened to me a couple of times. The self assigned IP and lack of Dante Name will be due to the Dante board error. When I restarted the AX64 it went away. I have the blank space in the device list for both the MTRX II and the AX64.
__________________
James Richmond https://www.jamesrichmond.com 2019 Mac Pro, 2022 Mac Studio Ultra Avid S6, HDX2, MTRX II, MTRX, DAD AX64, AX32, Focusrite Rednet PCIER, Trinnov MC8 Pro. Studio: https://www.voltperoctave.com | Music: https://www.euclideancircuits.com Latest Article: Auto-Bounce for Logic Pro Affiliate Links: Auto-Bounce by Tom Salta Dreamhost Web Hosting |
#14
|
||||
|
||||
Re: MTRX 2 Dante error at startup
Quote:
Dante card states fpga: 1.0.2.1, dntfwver: 4.1.1.1, appswver: 1.0.3.1 To find the firmare I had to do 5 restarts before anything came in sight. This thing is just wrong. You can not tell me this is normal behavior. Anyway I'll wait what Avid wants me to do with this one. Its unusable for me at the moment. I took al the cards out and go to work with my old one. Thanks anyway for making time for my problem... many greetings from the Netherlands, Johnny Hulst Hulst Audio Engineering
__________________
PT Ultimate 2024.03.0, Avid S1, Eucon 2023.11 16" MacBookPro (2023) M2 Max 12-core, 64gb Ram, 1Tb SSD, OSX 14.4.1 MTRX v.2.4.2.2 + dante card + madi baseunit + optical SFP 1300nm MTRX-II v.1.0.5.2 + TB3 + 1x AD mic 8ch + 1x DA 8ch + madi baseunit + optical SFP 1300nm MOM v.1.0.1.4 by DAD Genelec 1237A Sam, Avantone active mixcubes LA2a (1968), 1073 pre/eq, Neve RNHP, Wacom Intuos Pro Furman P1400 AR E Power conditioner Live-rack: 1x HD Native TB, 4x 192 I/O (64ch AD) 8x Yamaha HA-8 micpre, Rosendahl mif4, Genelec 1031A, Presonus Monitor Station Last edited by Johnny Hulst; 12-06-2023 at 10:30 AM. |
#15
|
|||
|
|||
Re: MTRX 2 Dante error at startup
Quote:
Yes sounds like you might be right. How annoying.
__________________
James Richmond https://www.jamesrichmond.com 2019 Mac Pro, 2022 Mac Studio Ultra Avid S6, HDX2, MTRX II, MTRX, DAD AX64, AX32, Focusrite Rednet PCIER, Trinnov MC8 Pro. Studio: https://www.voltperoctave.com | Music: https://www.euclideancircuits.com Latest Article: Auto-Bounce for Logic Pro Affiliate Links: Auto-Bounce by Tom Salta Dreamhost Web Hosting |
#16
|
|||
|
|||
Re: MTRX 2 Dante error at startup
Quote:
Does anyone know if the latest firmware 1.0.5.2 contains any fixes for the Dante card startup errors? The release notes do not mention any. |
#17
|
||||
|
||||
Re: MTRX 2 Dante error at startup
Thanks everybody...
Avid swapped my MTRX2 for another (or new) one, and the dante problem is gone now. Happy. Johnny
__________________
PT Ultimate 2024.03.0, Avid S1, Eucon 2023.11 16" MacBookPro (2023) M2 Max 12-core, 64gb Ram, 1Tb SSD, OSX 14.4.1 MTRX v.2.4.2.2 + dante card + madi baseunit + optical SFP 1300nm MTRX-II v.1.0.5.2 + TB3 + 1x AD mic 8ch + 1x DA 8ch + madi baseunit + optical SFP 1300nm MOM v.1.0.1.4 by DAD Genelec 1237A Sam, Avantone active mixcubes LA2a (1968), 1073 pre/eq, Neve RNHP, Wacom Intuos Pro Furman P1400 AR E Power conditioner Live-rack: 1x HD Native TB, 4x 192 I/O (64ch AD) 8x Yamaha HA-8 micpre, Rosendahl mif4, Genelec 1031A, Presonus Monitor Station |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dante latency with MTRX | PT_NOOB_CH | Pro Tools | MTRX & MTRX Studio | 6 | 05-22-2023 05:16 PM |
MTRX Sources - >Trinnov MC16 Dante ->MTRX Out routing ??s | Jeff Schmidt | Pro Tools | MTRX & MTRX Studio | 4 | 03-18-2022 02:21 PM |
MTRX Dante IO | clintonHT | Pro Tools HDX & HD Native Systems (Win) | 2 | 10-13-2021 04:14 AM |
MTRX Studio using Dante only | c-tone | Pro Tools | MTRX & MTRX Studio | 15 | 08-20-2021 02:00 PM |
MTRX Dante 128 Card Error | MarkH | Pro Tools | MTRX & MTRX Studio | 10 | 08-20-2021 05:42 AM |