Re: It's a sad day...
Greetings,
If troubleshooting network or connectivity issues I would recommend the following:
(1) Double check all Ethernet connections. I’ll defer to Eddie on specific known cable failure ranges.
(2) Use Port 1 on the Master Module whether using internal DHCP generation or being fed from an external router. There were some known failures on Port 2 of certain motherboards.
(3) Double check, or if necessary, bypass the pass-thru RJ45 connectors on the back of the frame if you are observing an intermittent connection issue.
(4) If there’s a lot of IP-Audio, Network Storage or other traffic, isolate the S6 connection to a dedicate NIC on your workstation.
best,
Jeff
Sent from my iPhone using Tapatalk Pro
|