PT 10 Mbox pro Insert

[Rafikicziki]

Hi,

I Have PT 10 and Mbox 3 pro. I want to connect my COMP Drawmer 1968 MKII.
So I choose in my interface output 3 and 4 then go to the COMP next go to line input 3 and 4. When I turn on INSERT Analog 3 - 4 on the track in the PT, COMP is working well and interface read a signal in 03 and 04 but i don't have any sound from my monitors. When I turn off this insert in PT it's good.
It is very funny because When I create a Master track and copy this insert 3 -4 to the master track and turn on it's workind.

All output i choose OUT Built-in Analog 1 - 2. What Can I do to this insert on audio track work the same how master track.

Please Help me.

[Darryl Ramm]

More specifics needed....

What do you have connected with what exact cable into what exact connectors?

You can start by getting a straight through cable to work as an insert. Have you done that?

It may help trying to getting mono to work before stereo. Work in very simple one mono track test session.

And I’ll insert the usual hardware toys comment here... you are likely to get the same or better performance with a stereo compressor plugin, with none of the hassle you are having...

Sent from my iPhone using Tapatalk

[Rafikicziki]

Ok so,

Mbox pro is numer 1
Drawmer 1968 is numer 2 (this is analog compressor)

From number 1 out 3 (jack symmetrical) to number 2 in XLR. Than from number 2 out XLR go to number 1 input line 3 (jack symmetrical)
The same For second channel but out and input in number 1 i choose 4

Here I give you a video what Now is going on:
https://drive.google.com/open?id=0B-...TVpZk16TVRicWs


Wysłane z iPhone za pomocą Tapatalk