2 soundcards with PT m-powered

[Joemamma]

I just read in another post that someone was able to use two Delta 1010LT's with PT m-powered.
However, on the PT m-powered compatibility site it says: "Simultaneous use of multiple M-Audio peripherals is not supported."
Has anyone tried and been able to use two Delta 1010's?

[Joemamma]

Can anyone explain what's up with this? ^^^

[Skyflash]

At best what I know is that the original Mpowered 6.9 demo did
allow the use of multiple Delta interfaces,but it only worked
at 16 bit. It was actually discussed here to a frequent and
large extent.

Then digi took out that functionality altogether for the shipping
version as they deemed it making Pro Tools too unstable,not to mention
that they would'nt want it to outperform LE systems.

There is now a demo of MP 7.0 that is fully functioning for 30 days
but I have not installed it,as I already have the free upgrade full
7.0 version that works with the original 6.8 ilok auhtorization.

I very well suspect that some people are just using the demo version
which is actually quite lame. At $299, I'd say PT MP is actually quite
a deal. And they are sacrificing performance and quality in their own work
and probably don't take themselves serious enough to be able to cough up
the money and actually buy the product...

Even if it works 'unoffically' in the boxed retail verion, I doubt it
would be as stable.

But hey, this is just my opinion.

[Gene Cookmeyer]

I have two M-Audio Delta 1010s and was experiencing clicks when I had both of them enabled on my system. When I disabled either of the cards, the random clicks stopped.

I'm using Pro Tools M-Powered 7.0cs3. The software seems to recognize both cards, but my guess is Digidesign didn't test this configuration or they would have discovered the sync/clock issue that is probably causing the clicks I'm hearing. I haven't tried using an external clock though.

Gene
http://www.topsoundproductions.com
Convert BR-1600CD/BR-1200CD projects to WAV faster! Use WAV-MAKER- 1600!

[jeff markham]

I just read in another post that someone was able to use two Delta 1010LT's with PT m-powered.
However, on the PT m-powered compatibility site it says: "Simultaneous use of multiple M-Audio peripherals is not supported."
Has anyone tried and been able to use two Delta 1010's?

yes, we attempted to use 2 Delta 1010s .. and M-powered would not
recognize either of the cards .. we disabled one of the cards in the
device manager hardware profile .. re-booted . and then it worked. upon consulting with
tech support, they confirmed that multiple sound cards would not work.

so, we dumped the 1010s and got an FW1814 and an optical ADAT pre for
16 channels .. and this has been working flawlessly.

i'm surprised that anyone has gotten a multi-card configuration to work,
because from what was intimated to us .. they actively defeated multi-card
configurations so as to not canibalize their other offerings.

jeff

[asylanten]

I hold a delta 1010lt and I received a very good offer to buy another one, but this mean that if I have to record 16 inputs I have to use another software, Can I hope in a miracle from digi?

[Skyflash]

I hold a delta 1010lt and I received a very good offer to buy another one, but this mean that if I have to record 16 inputs I have to use another software, Can I hope in a miracle from digi?

Most likely NO although someone in this thread claims to have it working with 2 1010's and has supplied links to screen shots
cause I did not believe him.

and I really don't believe that it's working for him as well as he's saying it is.
I even suspected maybe the screenshots were photo shopped...but...

anyway check the thread out and reply and ask him how he's doing it.
I would'nt bother wasting your time or money getting two 1010lt's to
work in Pro Tools.

[asylanten]

Most likely NO although someone in this thread claims to have it working with 2 1010's and has supplied links to screen shots
cause I did not believe him.

and I really don't believe that it's working for him as well as he's saying it is.
I even suspected maybe the screenshots were photo shopped...but...

anyway check the thread out and reply and ask him how he's doing it.
I would'nt bother wasting your time or money getting two 1010lt's to
work in Pro Tools.

I believe in what you're telling me, I'll do what you say but I know it's impossible to run two delta 1010lt together, thanks for your reply

[asylanten]

I've bought it, and with my surprise PT M-powered 7.1 has seen my two delta 1010lt, in input I have only the 10 in of one delta, but now I have got 16+4 outputs

[cwsand]

I made the post saying I'm using 2 1010lt's with PTMP 7.1 and guess what - it's still working flawlessly. And no, the pictures I posted are legit - not edited. While I realize that this is not supported and probably not the norm, it works for me and obviously is possible on some systems - I may have gotten lucky. I'm able to record 16 tracks at once and I run at 128 latency. Here again are some UNEDITED screenshots I took:

http://home.comcast.net/~cwsand/io.JPG

http://home.comcast.net/~cwsand/mix.JPG

If you still don't think I'm serious, check out my Nashville studio site:

www.EastsideProject.com

Anyone is welcome to come and see for themselves

Chris