|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
S1 Fader Cycle in test mode (Vegas Mode)?
I just got my brand new S1 and am having an issue with one of the faders being really tough when pulling the gain down on it while all other faders are buttery smooth. When I put the controller into test mode (Vegas Mode), the faders are not cycling.
According to the manual, the faders should automatically cycle until you touch one and the top left pan knob is supposed to control the speed of the fader cycle. But in my case, when I go into test mode, the faders just stay still. Is this normal functionality?
__________________
www.HellfireBeats.com UAD 2 Apollo Quad w/Thunderbolt 3, UAD 2 Satellite Octo TB3, UAD 2 Octo PCIe, Avid S1, Neve R6 500 Chasis, Neve Portico 511, Neve Portico 551, Dangerous DBox+, Focal Trio6 Be, Neumann TLM49, Akai MPC 2000XL, Akai MPC X, Mackie 1202VLZ Pro, Akai Advance 61 Pro Tools 2021.12 Mac Pro 7,1 2019, 8 Core, 48GB RAM - MacOS 11.6.2 16" MacBook Pro 2021, M1 Pro, 16GB RAM - MacOS 12.1 27" iMac, Late-2012, 3.4GHz i7, 24GB RAM - MacOS 10.15 Last edited by DJ Hellfire; 12-15-2021 at 10:06 AM. |
#2
|
||||
|
||||
Re: S1 Fader Cycle in test mode?
What happens if you move a fader....it should move the fader to the right
|
#3
|
|||
|
|||
Re: S1 Fader Cycle in test mode?
Yes. That does happen.
__________________
www.HellfireBeats.com UAD 2 Apollo Quad w/Thunderbolt 3, UAD 2 Satellite Octo TB3, UAD 2 Octo PCIe, Avid S1, Neve R6 500 Chasis, Neve Portico 511, Neve Portico 551, Dangerous DBox+, Focal Trio6 Be, Neumann TLM49, Akai MPC 2000XL, Akai MPC X, Mackie 1202VLZ Pro, Akai Advance 61 Pro Tools 2021.12 Mac Pro 7,1 2019, 8 Core, 48GB RAM - MacOS 11.6.2 16" MacBook Pro 2021, M1 Pro, 16GB RAM - MacOS 12.1 27" iMac, Late-2012, 3.4GHz i7, 24GB RAM - MacOS 10.15 |
#4
|
||||
|
||||
Re: S1 Fader Cycle in test mode?
Its working OK then. Check for intermittent touch indication on the bad fader.
|
#5
|
|||
|
|||
Re: S1 Fader Cycle in test mode?
Quote:
I noticed that if you lightly touch any fader, the faders give resistance to allow you to move the fader in fine increments and if you touch firmly on the fader it moves freely with no resistance. But on fader 7, the fader is always resistant regardless of how you touch it.
__________________
www.HellfireBeats.com UAD 2 Apollo Quad w/Thunderbolt 3, UAD 2 Satellite Octo TB3, UAD 2 Octo PCIe, Avid S1, Neve R6 500 Chasis, Neve Portico 511, Neve Portico 551, Dangerous DBox+, Focal Trio6 Be, Neumann TLM49, Akai MPC 2000XL, Akai MPC X, Mackie 1202VLZ Pro, Akai Advance 61 Pro Tools 2021.12 Mac Pro 7,1 2019, 8 Core, 48GB RAM - MacOS 11.6.2 16" MacBook Pro 2021, M1 Pro, 16GB RAM - MacOS 12.1 27" iMac, Late-2012, 3.4GHz i7, 24GB RAM - MacOS 10.15 |
#6
|
||||
|
||||
Re: S1 Fader Cycle in test mode?
If the touch isn't registering correctly this will cause this issue. Try a couple of things..take the fader cap off and reseat it, then wet your finger and touch firmly and see if there's a difference. If not I'm afraid you should return it. Has it been 30 days since purchase ?
|
#7
|
|||
|
|||
Re: S1 Fader Cycle in test mode?
Quote:
__________________
www.HellfireBeats.com UAD 2 Apollo Quad w/Thunderbolt 3, UAD 2 Satellite Octo TB3, UAD 2 Octo PCIe, Avid S1, Neve R6 500 Chasis, Neve Portico 511, Neve Portico 551, Dangerous DBox+, Focal Trio6 Be, Neumann TLM49, Akai MPC 2000XL, Akai MPC X, Mackie 1202VLZ Pro, Akai Advance 61 Pro Tools 2021.12 Mac Pro 7,1 2019, 8 Core, 48GB RAM - MacOS 11.6.2 16" MacBook Pro 2021, M1 Pro, 16GB RAM - MacOS 12.1 27" iMac, Late-2012, 3.4GHz i7, 24GB RAM - MacOS 10.15 |
#8
|
||||
|
||||
Re: S1 Fader Cycle in test mode?
Thats good as you can get a new unit replacement if within 30 days.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fader Flip (Sends to Fader) Mode | ibanman555 | Third Party Interfaces | 10 | 08-24-2020 07:54 PM |
Cycle thru EQs in Expanded Knob Mode | jmattchan | Avid S4/S6 | 11 | 08-21-2018 09:56 AM |
Control 24 self test, no fader values touch mode | Analogue_Rocks | ProControl, Control|24, Command|8 | 0 | 06-13-2015 01:47 AM |
volume fader in custom fader mode | KimSira | ICON & C|24 | 4 | 10-15-2008 09:54 PM |
No Fader Flip In Custom Fader Mode? | GlennR01 | ICON & C|24 | 13 | 05-29-2007 04:40 PM |