Yamaha 01v to control PTLE

[BruceB]

Hi all,
I recently got a Yamaha 01v mixer and I am feeling stupid as I can't get the faders on the 01v to control the PT software faders. I have PT configured to accept info from a CS10 under peripherals as it says in the manual, when using other than the listed comtrollers. If I create a MIDI track, arm it to record, I can see that midi info is getting thru when I operate an 01v fader by watching the level meter so I assume that OMS is all set up correctly and such. At one point I got the mutes to go on and off, but nothing else. Is there a place to assign controller #7 (volume) to the faders? I'm stuck- any help will be mucho appreciated. Thanks,
BruceB

[Zeus]

Yes, you can control PT with the 01v. But it really is not worth it...You can not get the 01v to reflect the fader levels etc. of Pro Tools.

[fmckinnon]

Is the 01v similar to the ProMix O1?? That's what I have, and I've also been somewhat successful and controlling PTLE w/ my ProMix, but it was limited - maybe with more time working on it.

------------------
Fred F. McKinnon, Highestpraise.Com
http://www.highestpraise.com

[BruceB]

Thanks for your replies/opinions folks, I know this can be done (controlling PT with 01v) but my question is exactly how? I can't find it in the manuals how to configure everything. I want to make my own decosion on whether it is worth it or not.
Thanks,
BruceB

[lamp]

BruceB,Do a search for O1V on the forum.Quite a bit has been posted. Brad.

[Tex Tiles]

I have a Pro mix 1 and to control pt faders with it you must choose the Peavey controller in the menu. The Yamaha protocol is very similar. (fader 2 becomes fader 1 and so on). It doesn't use the motorized functions though, and isn't that great, but is better than a mouse for some applications.