Hooking up regular speakers to 003

[GtrDude]

So far I've been using monitors by Event.
They're OK but I have much better speakers in my living room.
I would like to hook those up to the 003, or do what ever it takes to be able to listen to my PT sessions using them. Ideally to monitor as well.

The speakers I'm talking about have a regular + - input and are not powered.

How can I use my living room speakers with the 003 Factory?

Thanks

GD

[erthquake]

You could use the RCA outputs on your 003 and connect them to any RCA inputs that are on the receiver/amp that's powering your living room speakers. However, you really shouldn't use those living room speakers for monitors when recording and mixing. They're probably hyped in the top and low end, and that'll cause your mixes to have too much midrange.

[JMS40]

Originally Posted by erthquake

You could use the RCA outputs on your 003 and connect them to any RCA inputs that are on the receiver/amp that's powering your living room speakers.

No...
The RCA's on both the 003 and 003R are SPDIF digital connections, not analog audio.

[getz76]

Use your home speakers for referencing, but not for mixing.

How are your monitors currently set up? What is their position? Are they on any isolating material? Is your room treated at all?

[erthquake]

Originally Posted by JMS40

No...
The RCA's on both the 003 and 003R are SPDIF digital connections, not analog audio.

Doh! My bad. Didn't look at the 003 picture close enough. J's right. The OP might be outa luck then.

[JMS40]

Could use the 003 main outs.

[GTBannah]

Originally Posted by JMS40

Could use the 003 main outs.

.... or a "send and return" from the headphone output.

[Fairlight]

I'm hoping somebody can help me with this..

Can a pair of digital Genelec be connected to the 003R SPDIF output? If yes, how would I control the volume?

[Ben Jenssen]

Originally Posted by Fairlight

I'm hoping somebody can help me with this..
Can a pair of digital Genelec be connected to the 003R SPDIF output? If yes, how would I control the volume?

Yes. If they're something like this:

2029A Digital Active Monitor - Genelec.com

…with S/PDif inputs, just connect them to the S/PDif outputs on the 003. I guess they would have volume controls on the back, but just create a master fader in PT for the 003 spdif output, and you have the volume control. And you'll be bypassing the 003's DA converters, and be using the ones in the Genelecs instead.

[pianosound]

I agree of coarse with erthquake, but it is cool to have a larger, deeper sound now and then just for visitors to listen to, and this could be the cheaper way to do it (if you have an unused sterio amp laying around,,,, like the one in your living room!!??)
But for mastering a project we need the cleanest sound we can afford, and even then it takes burning a lot of CD's and trying them on home stereo, boom box, and car stereo, and making adjustments untill you get to know your speakers well! (I've been out in my car at 2:00 AM listening to tracks). have fun,,,,,,,,,,,,, Mike