|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#11
|
|||
|
|||
Re: StreamDeck integration with DADman
Thanks for the fix. All patched up!
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#12
|
|||
|
|||
Re: StreamDeck integration with DADman
Are you on 122? 121 didn’t quite fix it!
__________________
https://lukehoward.com/ |
#13
|
|||
|
|||
Re: StreamDeck integration with DADman
Yes. 122. By the time I saw your post you had already went to 122. (And everything is working great)
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#14
|
||||
|
||||
Re: StreamDeck integration with DADman
I have a Prism Titan with the PTHDX module and also a StreamDeck+. Would this app be useful for things like adjusting the Titan's mic pre levels (which ProTools views as pres from an MTRX, and enabled in the micpre tab in ProTools)?
|
#15
|
|||
|
|||
Re: StreamDeck integration with DADman
Quote:
The Titan <> Pro Tools communication for the mic pres is the same as the Avid Pre <> Pro Tools and MTRX mic pres <> Pro Tools which is via MIDI messages. StreamDeck does have a MIDI module (look in the plugin store under Dial actions and you'll find one called MIDI) which you could set up to send the same commands as Pro Tools to the Titan. I remember it was easy to reverse engineer what the commands were (just send Pro Tools to another MIDI device intercepting the MIDI messages sent to the Titan and see what messages are gain, phantom, etc.) Or, Avid might have even published those messages somewhere (Avid Pre manual?) I don't believe it used Sysex messaging (IIRC it used both the coarse and fine MIDI CC messages for more resolution and the StreamDeck MIDI module can do up to 4 CC for one dial.) Haven't done this is a long time but remember setting up a MIDI mixer to do this a long time ago with the Grace Design 8 channel pre that also used the Avid mic pre MIDI message control.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#16
|
||||
|
||||
Re: StreamDeck integration with DADman
I see. I didn't realize DADman was its own protocol. Yes, the Prism has no trouble responding to MIDI CCs, but I thought there might be an advantage to this module. Back to MIDI I go...
|
#17
|
|||
|
|||
Re: StreamDeck integration with DADman
Hi, I am new to stream deck. What is everyone's favorite rotary controller for monitor level? Any other hardware suggestions? Thanks!
Gideon |
#18
|
|||
|
|||
Re: StreamDeck integration with DADman
Quote:
It should also work with the nOb control but I haven't had a chance to test that myself. I want to add support for the Teenage Engineering ortho remote but I haven't had time, unfortunately it appears as a MIDI rather than a USB rotary encoder device so it will require some refactoring.
__________________
https://lukehoward.com/ |
#19
|
|||
|
|||
Re: StreamDeck integration with DADman
To be honest, probably the best knob is a real MOM, using the StreamDeck for labeled buttons and/or more buttons.
__________________
https://lukehoward.com/ |
#20
|
|||
|
|||
Re: StreamDeck integration with DADman
Ok good info, thanks Luke!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DADman question... | JR Fountain | Pro Tools HDX & HD Native Systems (Mac) | 9 | 05-07-2021 04:58 PM |
DADMan outputs | Goombot | Pro Tools | 7 | 04-22-2021 08:27 PM |
DADMan 2.1 routing out of Mac | Goombot | Pro Tools 2020 | 3 | 10-21-2020 08:08 AM |
DADman disconnects | pkingduk | Pro Tools HDX & HD Native Systems (Mac) | 12 | 07-26-2020 04:22 AM |
DADMan goes wonky | Jared_TL | Pro Tools HDX & HD Native Systems (Mac) | 5 | 12-29-2019 01:06 PM |