|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
New Mac, Cards don\'t show up....
Hi there -
First let me say that I have searched the DUC and RTFM'd until my fingers and eyes have bled Not new to Pro Tools, been running HD systems on Mac and PC since they came out and Mix before then, but this has me stumped. Just received my new Intel Mac yesterday Dual Core Xeon 2.66 with and HD3 Accel PCIe pro tools set up. Core slot 2, process cards 3-4 Running PT 7.2.1 for now. The mac absolutely does not see anything in the PCIe slots. Digitest won't run, doesn't see any hardware. I have reset the cards, re-installed PT. The mac users guide says I should adjust the PCIe power requirements in the utilities, but I don't see anything that will allow me to do that. The flex cables are installed correctly, btw. Am I just missing something completely obvious? I appreciate any insite the smart folks here might have for me - thank you! |
#2
|
|||
|
|||
Re: New Mac, Cards don\'t show up....
What about core only?
|
#3
|
|||
|
|||
Re: New Mac, Cards don\'t show up....
hmmmm - I haven't tried core only. Thank you, I'll give that a shot. Usually if something is this catastrophically bad, it's definitely operator error. I'll try to eliminate as many possibilities as I can.
Thanks again - |
#4
|
|||
|
|||
Re: New Mac, Cards don\'t show up....
Thanks tweakhead - as per usual it appears to be operator error and bad cable at the root of the cause. Somehow in my reinstalling PT to trouble shoot, I re-installed 7.2, not 2.1 that and a bad I/O connector cable, had me chasing my tail.
All appears to be fine. Taking a deep breath before jumping into re-installing and updating all my plugs.... *sigh* |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Loading show files in SHOW mode? | fohluke | VENUE Live Sound Systems | 2 | 03-29-2012 11:46 AM |
Pro Tools/D-Show standalone integration idea with D-Show show files/virt. soundcheck | digidesigner | VENUE Live Sound Systems | 2 | 11-08-2011 02:52 PM |
What is the thermal output/heat load of HD core cards and process cards? | yosemitesam | Pro Tools TDM Systems (Mac) | 0 | 10-24-2011 02:39 PM |
PCIe cards not being recognized in my MAC PRO ProTools not launching with cards in | phatbeatstudio | Pro Tools TDM Systems (Mac) | 6 | 10-15-2011 11:35 PM |
tracked show vs. sequenced show | AudioMajik | VENUE Live Sound Systems | 1 | 07-15-2006 04:40 AM |