|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Help with SC48 VNC Control
Anyone have issues with VNC control after 3.0 update ? We have installed the new ECX software on the console and it will not work. Prior to 3.0 update it worked fine. I have been battling this for months and months... then.....Recently we replaced a fader and the tech reset the console to a blank state and the VNC control worked, but when we reloaded a show it will not work again.
Pretty weird....Any ideas ? |
#2
|
|||
|
|||
Re: Help with SC48 VNC Control
Sounds like the default settings for the network are correct but that changes when you change shows. I believe the default is 192.168.1.1 or 192.168.0.1 cant quite remember which. Either way, I would go into a default show and take a look at the network settings there and copy what is has then check it against your show. Also make sure you have a static IP address. It is usually best to have that so that whatever VNC you are using can save those settings. Also this should come up when you check out the default settings but you could have one number off in your show's ip address. Note that the second to last number has to match up if the subnet is 255.255.255.0 but the last number must be unique. For example if your router is set to 192.168.1.1, set your console to 192.168.1.2. It wont work if your router is 192.168.1.1 and your console is 192.168.0.2 (if the subnet is like the example above).
Hopefully this will help get you started on the right path. Let me know if I can be of further assistance. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiple "Tap" control with function keys on SC48? | Keith Paynter | VENUE Live Sound Systems | 1 | 07-27-2012 09:32 PM |
Control Surface For Protools 10 Mackie Pro Control or Avid Artist Control | lberrios1962 | Pro Tools 10 | 18 | 05-26-2012 12:51 AM |
SC48 Ethernet Control Issues | itsblake | VENUE Live Sound Systems | 4 | 04-17-2012 10:04 PM |
SC48 with profile in control? | drewgandy | VENUE Live Sound Systems | 1 | 10-27-2009 10:59 AM |
SC48 how much dsp is in there? | digidesigner | VENUE Live Sound Systems | 18 | 06-08-2009 01:31 AM |