|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Configuration Question
Hey Guys
Just crossgraded to pro tools 9... two quick questions: 1) How do i configure PT9 to work with no interface? ( Macbook Pro and ilok) 2) What are the steps A-Z to change configuration once i do add an interface? Thanks in advance! |
#2
|
|||
|
|||
Re: Configuration Question
1) It should be "plug-n-play"
2) Cross-grading suggests that you've used PT before. What interface did you used then? Configuration should be no different from what you did before (I think).
__________________
Derrkins GuyBarTola ******************** PT 2018; Nuendo 8.?; Studio One 3; former Sonar and Sequoia user .... GENELEC 1031A, AVANTONE MIX CUBES (Active); Sibelius 7.0; Dorico; Mac Mini 2.6 GHz Core i7, OS X 10.12.2 Sierra; 16GB RAM; 480 GB System SSD; 1 TB 7200 rpm Audio; 3 TB samples; Roland A-800 Pro controller; GOOD BYE PEE SEA!! |
#3
|
|||
|
|||
Re: Configuration Question
Quote:
B. Check all of the connections on your computer C. Check all of the connections on your interface D. Make sure your electrical outlets are properly wired E. Turn on your computer F. Log in to your user account G. Check the website of your interface manufacturer for firmware updates H. If a firmware update is available, download the firmware update I. If you downloaded a firmware update, install the firmware update J. If there was no firmware update available, skip to step K. K. Check the website of your interface manufacturer for driver updates L. If a driver update is available, download the driver update M. If you downloaded a driver update, install the driver update N. If there was no driver update, skip to step O. O. Stand up and stretch P. Have a glass of water as hydration is key to a proper set up. Q. If you installed any firmware or driver updates, restart your computer R. If you restarted your computer, return to step A S. If you have not restarted your computer, go to step T T. Download your product's documentation. U. RTFM V. Test your setup to see if it works W. If it does not work, do some basic troubleshooting X. If, after basic troubleshooting, it still does not work, search the forum or FAQs Y. If it still does not work after more advanced troubleshooting, ask a question on the forum Z. If it still does not work after asking a question on the forum, call Avid for support
__________________
| Logic Pro 9 | Reason 6.5 | Pro Tools 10 | MOTU UltraLite mk3 | RME ADI-2 | Summit Audio 2BA-221 x 2 | MOTU 8pre x 2 | | Mac Pro (4,1) 2.26gHz Xeon x 2 16gB OS X 10.7.4 | Macbook Pro (8,2) 2.2gHz i7 Quad 16gB OS X 10.7.4 | |
#4
|
|||
|
|||
Re: Configuration Question
.... and now, getz67, YOU should go to step "O" and "P", and then GET BACK TO WORK!!!
__________________
Derrkins GuyBarTola ******************** PT 2018; Nuendo 8.?; Studio One 3; former Sonar and Sequoia user .... GENELEC 1031A, AVANTONE MIX CUBES (Active); Sibelius 7.0; Dorico; Mac Mini 2.6 GHz Core i7, OS X 10.12.2 Sierra; 16GB RAM; 480 GB System SSD; 1 TB 7200 rpm Audio; 3 TB samples; Roland A-800 Pro controller; GOOD BYE PEE SEA!! |
#5
|
|||
|
|||
Re: Configuration Question
To switch interfaces, you change the playback engine. forget right now which menu it's under, but I know it's by the top of the menu... sorry that's not much help, as far as just working off the outs on the laptop, you just startup PT, and if no interface is detected it defaults to the headphone jack/speakers
__________________
Jon Lillie Behind the Light Productions PT 10-CPTK-Motu Traveler v1 Mac Pro 2x2.8GHz Quad-Core, 14gigs of ram Macbook Pro w/Retina Display, 2.3Ghz i7, 16gigs of ram |
#6
|
|||
|
|||
Re: Configuration Question
If you've never used an external interface before, or have more than one, do:- Setup->Hardware, and select it. if you only have one, you only need to set it up once. After that PT will recognise it if it's there.
__________________
Derrkins GuyBarTola ******************** PT 2018; Nuendo 8.?; Studio One 3; former Sonar and Sequoia user .... GENELEC 1031A, AVANTONE MIX CUBES (Active); Sibelius 7.0; Dorico; Mac Mini 2.6 GHz Core i7, OS X 10.12.2 Sierra; 16GB RAM; 480 GB System SSD; 1 TB 7200 rpm Audio; 3 TB samples; Roland A-800 Pro controller; GOOD BYE PEE SEA!! |
#8
|
|||
|
|||
Re: Configuration Question
Quote:
__________________
Derrkins GuyBarTola ******************** PT 2018; Nuendo 8.?; Studio One 3; former Sonar and Sequoia user .... GENELEC 1031A, AVANTONE MIX CUBES (Active); Sibelius 7.0; Dorico; Mac Mini 2.6 GHz Core i7, OS X 10.12.2 Sierra; 16GB RAM; 480 GB System SSD; 1 TB 7200 rpm Audio; 3 TB samples; Roland A-800 Pro controller; GOOD BYE PEE SEA!! |
#9
|
|||
|
|||
Re: Configuration Question
Quote:
__________________
| Logic Pro 9 | Reason 6.5 | Pro Tools 10 | MOTU UltraLite mk3 | RME ADI-2 | Summit Audio 2BA-221 x 2 | MOTU 8pre x 2 | | Mac Pro (4,1) 2.26gHz Xeon x 2 16gB OS X 10.7.4 | Macbook Pro (8,2) 2.2gHz i7 Quad 16gB OS X 10.7.4 | |
#10
|
|||
|
|||
Re: Configuration Question
It's working for me here, and the Core Audio driver works with Logic. Thanx for reminding me to update my profile.
__________________
Derrkins GuyBarTola ******************** PT 2018; Nuendo 8.?; Studio One 3; former Sonar and Sequoia user .... GENELEC 1031A, AVANTONE MIX CUBES (Active); Sibelius 7.0; Dorico; Mac Mini 2.6 GHz Core i7, OS X 10.12.2 Sierra; 16GB RAM; 480 GB System SSD; 1 TB 7200 rpm Audio; 3 TB samples; Roland A-800 Pro controller; GOOD BYE PEE SEA!! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
i7 configuration question | S.TaylorRCC | Windows | 17 | 08-04-2011 06:08 PM |
Window Configuration Question | ZEUSS | Pro Tools TDM Systems (Mac) | 0 | 05-07-2011 04:09 PM |
Configuration Question... | lethic | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 01-10-2001 06:26 PM |
Configuration question | Lucky | General Discussion | 0 | 11-28-2000 11:28 AM |
442 TDM configuration question | punk | Pro Tools TDM Systems (Mac) | 3 | 11-10-1999 03:05 PM |