Problem Input MIDI with Presonus FP16

[TonyTls]

Hi,
I have one FP16 for Pro Tools 2019 and I want to link with HUI but FP16 in Pro Tools shows as MIDIIN2 (Presonus FP16) [Emulated] and Presonus FP16 (Emulated) in Setup>Peripherals>Midi Controllers.

I did everything that was asked of me in the instructions ;

(in order to set up the FP16 properly in PT:

Ensure the unit is in HUI mode>

Power off the FaderPort
Holding the first and second "Select" buttons on the FP, Power the unit back on
Once the unit has powered up and displays "Select Control Mode" across the top of the scribble strips you can release the Select buttons
Select "HUI"
Press the eighth "Select" button ("EXIT" will be displayed on the scribble strip above this Select button)
Then ensure connectivity to PT
Open ProTools
Open the "Setup" drop down menu and select "Peripherals'
Set "Type" to "HUI"
Select FaderPort16 under "Receive From" and "Send to"
Do this for the second line as well)

But i'm still with this two only input...
(I work on Windows 10)

Can someone help me please ??