C-24 Monitor section

[Rollerex]

Am I the only one who thinks the monitor section should have alot more gain.
I have a Bryston 4B and the C24 at fill up with the stereo bus in the Red is at about 1/4 of the Bryston output.
I havent taken any measurements to see what the output level is coming out of the C24 nor does the Bryston have meters. Just two leds a green for signal present and red for outta headroom. What Amp Speakers do you guys use?
Will the C24 power them to full?

[Sergent Pepper]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by Rollerex:
Am I the only one who thinks the monitor section should have alot more gain.
I have a Bryston 4B and the C24 at fill up with the stereo bus in the Red is at about 1/4 of the Bryston output.
I havent taken any measurements to see what the output level is coming out of the C24 nor does the Bryston have meters. Just two leds a green for signal present and red for outta headroom. What Amp Speakers do you guys use?
Will the C24 power them to full?<HR></BLOCKQUOTE>

I have a NAD on ALT monitor and Alesis Matica 900 (2*250) on main, and this is OK for me.
I saw a post from a guy having the same trouble as you about 2 weeks ago "Specs not as advertised" or something like this.

BTW, is your Mono button working normaly ?

[PTstress]

Please see my post C24 Not as advertised spec. You are not alone and this problem is SERIOUS. I am still awaiting a response from Digi on this matter.

[masaudio]

Hi!
I tryed mine today and went direct to my Paradim speakers (self amp.)and everything was O.K.

[PTstress]

Dear Mas

Please try comparing the output from your control 24 with the output from an 888 if you have one, and let me know the results? Im pretty certain there will be a major difference. The 888 being true +4db and the C24 being nowhere near.

[8bit]

i noticed the difference, it was quite considerable. i am running dynaudio BM15a's and straight out of the interface they are much louder.