|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Errors after updating to 8.0.4
Hello,
I have Pro Tools 8, and I recently updated to 8.0.1, and then updated again to 8.0.4 and added the cs2 update. For all these updates, I'm getting a number of different errors that I never got with PT8, such as: "The operating system held off interrupts for too long. If this occurs frequently, try increasing the "H/W Buffer Size" in the Playback Engine panel. (-6093)" "A firewire bus reset was detected. Please check firewire cables and power to firewire devices." (-8090) All these occur after briefly playing or recording through one stereo track (1 minute or less, usually around 15-20 seconds of use), and before updating, I could run many tracks without any errors, and now it can't even record one without getting interrupts and errors that stop the recording. I use a Mac Pro, with 2 2.33 Ghz processors, 4 GB of RAM, current version 8.0.4cs2, with a Glyph external harddrive and 003 Console. I don't know how many FireWire ports/devices there are, as I am a novice Pro Tools user. Help would be appreciated, as the system is virtually unusable right now. Thanks! ~ZJ |
#2
|
||||
|
||||
Re: Errors after updating to 8.0.4
When running 8.0.4, you need OS Snow Leopard. What version of the OS are you running?
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
iLok Errors after updating from V 8.0.4 to 8.0.5 | kenscs | Pro Tools M-Powered (Win) | 1 | 04-19-2012 09:29 PM |
Updating PACE drivers... before updating to 9.0.5 | lanstrad | Pro Tools 9 | 0 | 08-28-2011 07:37 PM |
many errors- fatal errors and 9060 error. Sandra report inlcuded.. | bradykrzemien | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 19 | 09-16-2009 11:56 AM |
Updating HD7.2 to HD7.4. Will plugins need updating? | Ru_C | Pro Tools TDM Systems (Mac) | 4 | 08-14-2009 04:02 AM |
errors errors errors Please digi tech guys help me | dunkyj | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 11-11-2005 01:19 PM |