Word clock question

[TornadoTed]

I have been running a HD4 setup with a pair of Lynx Aurora 16 happily for several years. I have the one set as master with a BNC cable going from it's output to the other Auroras input which is set to slave.

I have just bought a 192 Digital and was wandering how to feed that word clock....

A BNC from the out from the 2nd Aurora into the 192?

A 'T' to split the BNC from the 1st Aurora to the 2nd Aurora and 192?

Get a master clock (looked at the BLA Microclock) and feed the 2 Auroras and the 192 from that?

[crizdee]

Originally Posted by TornadoTed

I have been running a HD4 setup with a pair of Lynx Aurora 16 happily for several years. I have the one set as master with a BNC cable going from it's output to the other Auroras input which is set to slave.

I have just bought a 192 Digital and was wandering how to feed that word clock....

A BNC from the out from the 2nd Aurora into the 192?

A 'T' to split the BNC from the 1st Aurora to the 2nd Aurora and 192?

Get a master clock (looked at the BLA Microclock) and feed the 2 Auroras and the 192 from that?

A feed from the second Aurora should work! you'll soon know if you get pops and crackles etc.


Chris

[JFreak]

Or you could set that 192 be a clock master and feed the other boxes from the Digi interface. You know, the loop sync (which you don't need for single Digi interface) always outputs 1x clock, the same as the ext.clock output.