|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
SSC - multiple outputs via SC2+?
Can the "outputs" of SSC be routed to the hardware outputs of a SC2+ card? I'd like to use SSC as a bigger 'RAM tank' for an existing SC2 card. Phone support said this is possible, but I'd like to see it in writing before I buy. Would this work stand-alone, without ProTools running?
Thanks, Irl Sanders Los Angeles, CA, USA
__________________
Irl Sanders Music Editor LA, CA, USA |
#2
|
|||
|
|||
Re: SSC - multiple outputs via SC2+?
bump
__________________
Irl Sanders Music Editor LA, CA, USA |
#3
|
|||
|
|||
Re: SSC - multiple outputs via SC2+?
Hi Irl,
I am not 100 percent sure but I think that does not work. I have both SCII card and SSC on a Macintosh TDM system. If I start to load a sound the software asks me whether I want to use it on SC II card or SSC. In a tdm-setup there is no link between both. But I think you use it without TDM as you want to have more outputs for SSC. In tdm it has 32 outputs to the tdm bus, that's a lot... I don't think you can use a SC II card as a Direct I/O device. But as I mentioned before, no guarantee on this... Regards Mark
__________________
Mac Pro 2010 3.66 GHz six Cores, HD Native, 192 I/O, Avid Dock, Artist Mix and Pro Tools Ultimate Mac mini 2018 i5 64 GB RAM, RME Fireface, Pro Tools 2021, Euphonix MC Control MacBook Air 2020 (M1) 16 GB RAM, 1 TB SSD, Zoom U-44 and Pro Tools Ultimate |
#4
|
|||
|
|||
Re: SSC - multiple outputs via SC2+?
Thanks Mark - that's as I suspected, but two different pre-sales guys at Digi told me otherwise. Moral of the story...never trust a saleman!
__________________
Irl Sanders Music Editor LA, CA, USA |
#5
|
||||
|
||||
Re: SSC - multiple outputs via SC2+?
Mark is correct.
Samples loaded in Soft SampleCell cannot be played out through a SampleCell card. Soft SampleCell can use Sound Manager (2 outputs via Mac), Direct I/O (up to 16 outputs via digi hardware), or DirectConnect (32 outputs via PT software).
__________________
• linkedin •
|
#6
|
|||
|
|||
Re: SSC - multiple outputs via SC2+?
Quote:
__________________
Irl Sanders Music Editor LA, CA, USA |
#7
|
|||
|
|||
Re: SSC - multiple outputs via SC2+?
Maybe they meant that you can load *SampleCell* (no Soft) samples onto the card and use its eight outputs.
|
#8
|
|||
|
|||
Re: SSC - multiple outputs via SC2+?
Oh, and there's a TDM daughtercard for the SampleCell card that routes its outputs into the TDM mixer. No DirectConnect needed - the cards are connected with a ribbon cable.
|
#9
|
||||
|
||||
Re: SSC - multiple outputs via SC2+?
With a SampleCell II PCI or Plus card installed, the Soft SampleCell Editor gives you the choice of loading samples into the Mac's RAM or the SCII's RAM. Maybe that's what they were referring to.
I'll send a note to the sales crew when we are back in the office on Monday to clarify this.
__________________
• linkedin •
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mix to multiple outputs | scottpetito | Pro Tools TDM Systems (Mac) | 0 | 05-13-2008 04:37 AM |
Multiple outputs | beelzebub | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 03-29-2007 10:00 AM |
Multiple Outputs? | Digitalkidd | Virtual Instruments | 9 | 02-19-2006 05:36 PM |
Multiple outputs for multiple players. | KingFish | ICON & C|24 | 1 | 05-08-2004 01:13 PM |
Multiple outputs | MaizeBass | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 01-22-2002 07:58 PM |