002 will not record midi notes sent from my mpc?

[starvinboi]

I went through step by step reading the 002 (manual/protools guide book) and performed all of the input/output midi settings required to record the midi/drum notes sent from my mpc2000xl into the protools 002 mixing console. I can hear the drum notes in my headphones connected to the 002 mixing board as I play them from the mpc, but the notes don't register on the midi track when I hit record.
Can someone please give me some suggestions on what may be the cause of this?

[mobonix]

I am having the same problem. I have both my Motif and MPC sync'd up properly using Midi but the MPC will not record any notes, nor do I see any levels on the velocity meter. 002 console has "midi in" led lit.
I have an audio track and a midi track both armed for recording. Only audio is recorded during the sync. My pro tools triggers the MPC.

How do I record the notes into the editor?

[cetanorak]

I have not had access to my Pro Tools gear for about a month now, but these would be my suggestions off the top of my head.

Make sure the input to the MIDI channel is set to "ALL", I think.
Try turning Low Latency Monitoring off, and see what that does.
Of course, make sure to record enable the MIDI track.

[mobonix]

Input to MIDI is set to ALL,

Low latency monitoring is not a factor,

and MIDI track is record armed.

None of those things work. I know the MIDI devices are set up correctly because I am able to sync. I've played with different options with midi beat clock and trying different channels. Nothing works

[DigiTechSupt]

In the MIDI menu, make sure that 'MIDI Thru' is enabled.

This should solve the problem.

[mobonix]

Thanks for everyone's help!

I finally got it to start recording MIDI notes sent from the MPC.