Software input monitoring

[basslik]

Originally Posted by upscaps

Here you go. FREE of charge. Works fine.

http://www.tritonedigital.com/index....hk=1&Itemid=20

upscaps your good bud.

[mattrixx]

Originally Posted by mattrixx

I've been asking for this for years! http://duc.avid.com/showthread.php?p...39#post1273339

However, there's a great little workaround out there from Salvator of Tritone Digital, called MuteTone.

http://www.tritonedigital.com/index....hk=1&Itemid=20

Oh, and it's free!!!!

like i said!

[maxtools]

hi
i have a command 8, (PT9) and "Tone Mute"
PT9 says: you have selected a midi controller that is not compatible with command 8
Deselect this device or remove command8 selection..
any workaround ?
Thank you
max

[Rob_A]

Originally Posted by mattrixx

However, as I mentioned, there is a free workaround that takes care of the problem for now.
Regards,
Matt

Yes, if your on a MAC but us PCers are still out in the cold...

[vsukpadman]

Anyone using this with Lion/PT 9.0.5 ?
Crashes every time for me on removing the plug and sometimes hangs making it unusable..

any ideas?

Bill P

[mattrixx]

Working well on my test system with Lion. Might be an idea to go to "audio midi setup" and rebuild from within there. I didn't have to do such, but trying to think outside the square.

[niejiabei]

Originally Posted by vsukpadman

Anyone using this with Lion/PT 9.0.5 ?
Crashes every time for me on removing the plug and sometimes hangs making it unusable..

any ideas?

Bill P

I have the same system as you, and experience the exact crashing problem, it was fine on my another macbook pro which is 10.6.8.

[ROBB007]

As much as I love the plug in I would much rather have Avid add this feature to the software so it can be incorporated into the code and software.I mean it can't be so hard ?Looking forward to a full pro version of 9 in the future.

[vsukpadman]

Hmm..crashing not just for me then - real shame, as I could really use this !

thnx

BP

[chipss36]

this issue trips me out, something needed to have a proper work flow in a native system, and to me seems like oops we forgot something here, not a upgrade but a cs fix.

if you don’t understand why this is needed please don’t cop an attitude toward those who do…
I have seen that over and over, it does not help with a true problem in using non avid interfaces, or outboard gear….screws up peoples work flow…it IS a problem…

The plug in seems like a great work around, unless your on a windows computer, or use, as I do a
command 8.

It is needed, most all other daws have it, and I would have it as well …if I was using an avid interface ….LLM

Please avid adress this issue.