|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#11
|
|||
|
|||
Re: g3 bootup
> WHY DOES'NT IT HAPPEN WITH OTHER
> EXTENSIONS? Other Extensions do not reprogram the B&W G3's pci-bridge chip in the same way we do. It is necessary to make this change in order to get the performance we require. > DIGI NEEDS TO FIX THEIR CRAPPY > DRIVER,IT'S ALWAYS THEIR WAY OF AVOIDING > REPONSABILITY,BLAME THE PLUGIN,NOW IT'S THE > COMPUTER. This is a known issue with the rev of the pci-bridge that Apple chose to put on the B&W G3 motherboard. They are very much aware of the problem. However, after extensive investigation there doesn't appear to be anything that can be done to completely prevent the crash when this parameter is changed. On the good side, this does *not* appear to be an issue with Sawtooth (G4-AGP) motherboards. -- Joe Saracino Digidesign Engineering |
#12
|
|||
|
|||
Re: g3 bootup
I also have the same problem every 10th boot or so... B&WG3 350/PT Project/ScII/2940UW
Hopefully this isn't a problem for G4 users (not that it helps me any :^) |
#13
|
|||
|
|||
Re: g3 bootup
<<This is a known issue with the rev of the pci-bridge that Apple chose to put on the B&W G3 motherboard.>>
Joe: Why is this happening with my 9600/300? Dan Matthews InSight Sound Recording http://members.aol.com/InSights7
__________________
Dan Matthews InSight Sound Recording Loveland, CO (970) 663-1650 InSight Sound Web Page |
#14
|
|||
|
|||
Re: g3 bootup
hi brad,
did as you suggested, tried the easiest/most obvious 1st. made sure only base extensions were installed, seems to have done the trick, am up to about 8 start ups so far without a hitch. is this situation going to change with pt 5 at all? many thanks |
#15
|
|||
|
|||
Re: g3 bootup
hi brad,
did as you suggested, tried the easiest/most obvious 1st. made sure only base extensions were installed, seems to have done the trick, am up to about 8 start ups so far without a hitch. is this situation going to change with pt 5 at all? many thanks ps not using an expansion chassis |
#16
|
|||
|
|||
Re: g3 bootup
InSights7: >Why is this happening with my 9600/300? hmmm. I'm not sure why the DigiSystemINIT is crashing the first time when you boot up -- it's definitely *not* the same problem as the B&W G3's being described in the rest of this thread. My initial guess is there's some flaky hardware in your system. I'm curious if it fails every time you do a "cold" boot or if it fails only the first time (when it actually is "cold"). After you get the system up, do a shutdown, wait for a few moments, then start it up again to see if it crashes. Also, after the first crash, do you have to power cycle the Magma chassis? You could also try removing each "class" of HW you own -- first remove the SampleCell and see if it happens. Then try removing your Mix HW, etc. Also maybe try with the expansion chassis turned off to see if has nothing to do with the external HW at all. I know this is a pain, but it might yield more clues to get you closer to the problem. -- Joe Digidesign Engineering |
#17
|
|||
|
|||
Re: g3 bootup
Joe: In answer to your questions:
<<I'm curious if it fails every time you do a "cold" boot or if it fails only the first time (when it actually is "cold"). Only at the start of each day. If you shut down ProTools and the CPU, you can do a restart and the system loads fine. <<After you get the system up, do a shutdown, wait for a few moments, then start it up again to see if it crashes.>> It does not crash when doing this. << Also, after the first crash, do you have to power cycle the Magma chassis?>> NO. Dan Matthews [This message has been edited by InSights7 (edited 11-04-99).]
__________________
Dan Matthews InSight Sound Recording Loveland, CO (970) 663-1650 InSight Sound Web Page |
#18
|
|||
|
|||
Re: g3 bootup
I've put together a extension and control panel list for (Pro Tools post v4.2-OS 8.x) trouble shooting if there's any thought the Pro Tools problem might have to do with an extension conflict when booting the DSI ect ect. This list is strictly for that and not a working extension/control panel set. To avoid confusion when moving around extensions and control panels and to be thorough in utilizing control over the extensions and control panels (extension manager can be flaky) create a desktop folder, one titled extensions and one titled control panels and move all your extensions and control panels to the appropriate folders you've diligently created on the desktop. Now move back these extensions and control panels listed below in the OS hard drive/system/extension-control panel folders and restart. Yes there's some extensions and control panels that would vary depending on circumstances (Quicktime ect ect ) so bare with yourself.
Extensions: Audio CD Access Digidesign DSP Manager DigiSystem™ INIT Digidesign® Output Driver Foreign File Access High Sierra File Access Open Tpt AppleTalk Librar Open Tpt Internet Library Open Transport Library OpenTptAppleTalkLib OpenTptInternetLib OpenTransportLib Shared Library Manager Shared Library Manager Sound Manager Text Encoding Converter Control Panels: Appearance Control Strip Extensions Manager General Controls Memory Monitors & Sound Mouse Sound Brad [This message has been edited by TechSupt2 (edited 11-04-99).] |
#19
|
|||
|
|||
Re: g3 bootup
<<My initial guess is there's some flaky hardware in your system.>>
Joe: You are right! It appears I have a hosed/intermittent, "Vintage" PCI II Farm. I got a RA from Beto and have an advance replacement on the way. It should arrive later today. Hopefully this will solve the problem. Thanks! Dan Matthews InSight Sound Recording http://members.aol.com/InSights7
__________________
Dan Matthews InSight Sound Recording Loveland, CO (970) 663-1650 InSight Sound Web Page |
#20
|
|||
|
|||
Re: g3 bootup
InSights7: Fantastic! Glad to hear this one got squared away Thanks Beto! -- Joe Digidesign Engineering |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
bootup issues w/ 7.4.2 | cgrain | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 07-04-2008 01:13 PM |
OT......XP bootup and performance | Dogcode | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 10-31-2004 10:26 PM |
chkdsk at bootup | bubiddy | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 5 | 03-27-2004 09:58 AM |
Panther and OS 9 BootUp | fifty8th1 | Pro Tools TDM Systems (Mac) | 8 | 02-02-2004 10:54 AM |
NEW G4 BOOTUP TRICK | blueroom | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 54 | 09-27-2002 05:19 AM |