|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
MachineControl for DVW500P
Hi all,
we want to control a Digibeta DVW500P (PAL). We didn't find a machine template for that. Also for a DSR-1600P. There are only as NTSC models listed. Normally we use BVW75P but the track arming section is different on DVW. Does anybody know where to find that or have I to write it myself? Thanks for any answer Matthias |
#2
|
|||
|
|||
Re: MachineControl for DVW500P
When you click on the menu for node in Machine Control, what machine does Pro Tools think you are using? Have you tried using the DVW500 and DSR-1600 NTSC profiles? If they work, use them. Otherwise, load those profiles, then modify them a bit and save them with PAL as part of the name. From Machine Control's point of view, chances are the only thing different between a PAL and an NTSC deck is the deck's identifier code (which you can get by clicking Identify Machine when editing/creating a machine profile).
__________________
Jonathan S. Abrams, CEA, CEV, CBNT Apple Certified - Technical Coordinator (v10.5), Support Professional (v10.6 through v10.10) |
#3
|
|||
|
|||
Re: MachineControl for DVW500P
Hi Jonathan,
thanks for your suggestion. Where do I find the templates in order to modify them? |
#4
|
|||
|
|||
Re: MachineControl for DVW500P
Hi Matthias,
just use the DVW-500 NTSC profile. It works perfectly for PAL setups, too. Try it ! Peter |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sync i/o and machinecontrol don't mix with PT7? | Studio Studio | Pro Tools TDM Systems (Mac) | 3 | 06-04-2006 01:06 AM |
PT v6.1, SYNC I/O, MachineControl v2, DA-88 | Chief Technician | Post - Surround - Video | 3 | 11-17-2003 08:28 PM |
MachineControl with HD | Sagitarius | Pro Tools TDM Systems (Mac) | 3 | 04-02-2002 06:50 AM |
MachineControl | kurt | Pro Tools TDM Systems (Mac) | 1 | 10-26-2001 06:02 PM |