003r clicking sound and unwanted signal on input 1

[003user]

No. I tried both directions and when piping audio from the Fostex into the 003 over optical ADAT, I cannot sync the Fostex to the clock of the 003. It does sync properly (PT master, Fostex slave) when piping audio from 003 to fostex.

Only 1 optical cable is connected.

I tried the ADAT loop test on the 003, and I get no sound either

[Darryl Ramm]

Yes but of course this won't work. You need a TOSLINK cable from the 003 to the Fostex box for the clock and another TOSLINK cable from the Fostex box to the 003 for the signal. Or arguably better get all your stuff connected by Wordclock.

[003user]

Oh
Oh my…
Thanks. It works now

So you recommend a wordclock cable for syncing and an ADAT cable for audio signal?

As you can see, I never used ADAT before. Thanks for understanding!

[Darryl Ramm]

Originally Posted by 003user

Oh
Oh my…
Thanks. It works now

So you recommend a wordclock cable for syncing and an ADAT cable for audio signal?

I just like knowing everything is connected over wordclock, it makes setting up larger configs easier. It's possibly a better clock signal in some cases, but that's not the first reason I would use it. I doubt you will ever hear any difference between which box is providing the clock in your setup.

[003user]

I think it will become quite a puzzle if I’d set it all up with wordclock cables. I have two Akai’s, mbox 2 pro, 003 and fostex with wordclock connections.

If I get the mbox slaved properly to the 003 with spdif cables and I get no pops and issues, I’m good ;-) The Akai samplers I have connected with jacks.

Thank you very much for your assistance