error message -9129

[crisis_roc]

I keep having this error. I increase the buffer playback and get a error. Then i decrease it and get another error. I working on a hp laptop. Im using one of the laptops off of digi compatible list of laptops. Im also using 7.1 LE

[sw rec]

First things' first. Must have system info:
http://duc.digidesign.com/showthread.php?t=193637
Then when you're done with that, read this:
http://duc.digidesign.com/showthread.php?t=133039

Digi compatible is only half the story. If I were to venture a guess, are you recording to your system drive?

[crisis_roc]

Intel Core Duo processor T2400 (1.83-GHz, 667-MHz FSB, 2-MB L2 cache)
17.0-inch WSXGA+ wide viewing angle BrightView display with 1680 x 1050 resolution and 16M colors
1GB (1x1GB) 533-MHz DDR2 SDRAM
ATI Mobility Radeon X1600 graphics controller with 256 MB of discrete video memory
100GB 5400RPM Hard Disk Drive
Built-In Intel PRO/Wireless 3945 A/B/G
HP Integrated Module with Bluetooth 2.0 Wireless Technology
8-cell high capacity Lithium-Ion (68Wh)
DVD+/-RW SuperMulti with Double Layer
Ports: 1x IEEE 1394a Port, 1x Type I/II PC card slot, 1x S-Video TV out, 1x VGA/External Monitor, 1x 7-in-1 Media Reader, 4x USB 2.0, 1x headphone out, 1x microphone in

[TOM@METRO]

Originally Posted by sw rec

First things' first. Must have system info:
http://duc.digidesign.com/showthread.php?t=193637
Then when you're done with that, read this:
http://duc.digidesign.com/showthread.php?t=133039

Digi compatible is only half the story. If I were to venture a guess, are you recording to your system drive?

As said,
It looks like you are only running one hard drive and the one you have is to slow. You need a separate drive for audio and it needs to be at least 7200 RPM. It needs to be firewire not USB, and will require an approved firewire controller with a TI chipset. You are at bare minimum for RAM so don't expect to much from it until you add some.