|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
Subject says it all. I just bought a DIGI 001. I'm trying to configure the Hardware Setup. When I open the Hardware Setup dialog box there is no option for setting the Ch 1-2 Input for Channel 1-2 Anolog or S/PDIF. As a consequence, PTLE (5.3.1) is defualting to S/PDIF for new track (1-2) Output, i.e., I have no option to select Analog 1-2 (Stereo) or (Mono). Anyone ever seen this? Thanks.
|
#2
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
While in a PT session, go into setup>I/O setup and click on the input tab. Is input 1 and 2 set up for analog on the Digi?
Greg
__________________
Intel i7 3930K, Gigabyte GA-X79-UP4 (rev 1.0), 32 GB Corsair Vengeance 1600 ram, EVGA Nvidea GT 720 TI video card, a Samsung 850 Pro (256 GB) OS drive, 2 Samsung 850 Pro's (512 GB) in externally mounted drive bays for session and sample storage, Win 10 Pro, PT Ultimate (Native)2019.10, HD Omni, HD I/O 16x16 . |
#3
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
Quote:
|
#4
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
In PT. Setups> Hardware Setup you should only see 3-4 5-6 7-8 because those are analog inputs without the front-panel faders; but you for sure should see Analog 1 Analog 2 when you click the input button on an individual channel and look under "Interface".
(Make sure you have Display> 'Mix (or Edit) Window Shows> I/O view' selected). If you don't see it, go into Setups> I/O Setup and click the input tab. If you don't see "Mic/Line 1-2" at the top there, then go to the lower right and click the DEFAULT tab then OK. That will reset the labels for the I/O matrix. |
#5
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
Quote:
|
#6
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
Sounds like you're good to go! [img]images/icons/wink.gif[/img]
|
#7
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
This might be a given....but in Setups menu, when you pop on Hardware, does the Sync option have internal or optical selected?
If you are not using ADAT or any lightpipe , then internal should be selected. Once this happened to me...i lost analog 1 &2 because i had optical selected, but now i have optical selected, and both ADAT and analog inputs are showing up in my I/O...go figure that one out. [img]images/icons/smile.gif[/img] kenny
__________________
my webpage |
#8
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
Quote:
|
#9
|
|||
|
|||
Re: DIGI 001, no Ch 1-2 input in Hardware Setup dialog!?
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hardware Setup Window Dialog Missing | QuickPuppy | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 05-01-2013 07:55 AM |
What??? MBox3, 8.05 No Hardware Setup Dialog Box!! | Ormond | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 4 | 06-01-2011 01:30 AM |
hardware setup dialog is empty on digi 002 factory | bigboi78 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 05-11-2007 04:31 PM |
Can't access Hardware Setup Dialog??? | Jepse | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 04-18-2005 09:54 AM |
Strange problem in Hardware Setup dialog | tld | Pro Tools TDM Systems (Mac) | 0 | 08-13-2000 08:07 AM |