Pro Tools TDM 6.9cs2 Update

[Avid]

Pro Tools TDM 6.9cs2 Update

For Pro Tools|HD and Pro Tools|HD Accel Systems with Pro Tools 6.9 on Mac OS X 10.3.8 "Panther" and Windows XP

Available for download from the Support->Downloads->Index of All Pro Tools CS Updates:
http://www.digidesign.com/download/cs/

What's Fixed in Pro Tools TDM 6.9cs2?

Pro Tools TDM 6.9cs2 for Mac OS X 10.3 and Windows XP contains the following:

Fixed: Legacy Peripherals Attached to a 192 I/O or a 96 I/O (with Firmware Version 4.3) Would Exhibit Incorrect Gain at Their Inputs (Item #59048)

If you have a 192 I/O or 96 I/O, and the interface firmware version is 4.3, you need to run the DigiTest firmware updater. If your 192 I/O or 96 I/O has firmware version 3.0, incorrect input gain does not occur, and you will not be able to update the firmware. This does not apply to the 96i, which does not have a legacy port.

To verify and update the firmware version:

1. Launch the DigiTest application.
2. Click on the Firmware tab.
3. Make sure the peripheral information for the appropriate card slot is being displayed, and press “Rescan” if necessary.

Do one of the following:

• If the firmware version in the selected peripheral is 4.3, lower the gain on your audio monitors and press “begin update.”
• If the firmware version is 3.0, you have the correct firmware and you do not need to do anything.
• If the firmware version is less than 3.0, update the firmware to version 3.0. (This is unrelated to the legacy peripheral bug.)

Pro Tools TDM 6.9cs2 also includes all fixes from Pro Tools TDM 6.9cs1, as detailed on the 6.9cs2 download page and included Read Me document.
======

A similar fix will also be released shortly for Pro Tools 6.9.2 for Mac OS 10.4.