|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#41
|
||||
|
||||
Re: HDX Driver No Longer Shows after 2021.10 Install
Quote:
__________________
• linkedin •
|
#42
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Probably not relevant but just in case....
From Avid's instructions, it looks like it's important that the Mac doesn't go to sleep in order to keep seeing the HD driver. I have a problem with my MBP M1 Max where it goes to sleep even though I have it set to "Prevent your Mac from automatically sleeping when the display is off". What happens is quite stupid - the external screen goes blank when I use a "Hot Corner" and then the screen itself turns off (standby) after a few seconds. The Mac is still running and will keep running all night, doing backups etc, all with the screen off. Then, when I sit at the computer in the morning, I hit the spacebar (or click the mouse) and the external display tries to start up. It takes quite a long time, because it's pretty big. By the time the display has woken up, the Mac has decided that it doesn't have an external screen attached anymore, and goes to sleep. After much bashing of the spacebar it all comes back to life - but - it has been to sleep, and if you need the HD driver, that might be enough to stop it working. In my case, the only workaround is to keep the laptop open, so that at least one screen (the internal laptop screen) is always working. In clamshell mode, I get the unwanted "sleep incident". Dominic |
#43
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Quote:
|
#44
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Quote:
Out of frustration I re-installed the driver repeatedly, maybe 8 times. Eventually (!!) I got it to where it is now: the driver loads automatically when booting up. But it still only works once, the first time the hardware is turned on. If turned off then on again, my hardware is invisible to the system and no terminal command can bring it back. Only re-booting makes it possible.
__________________
-- Michael PT Ultimate Native 2021.10 Mac Pro 7,1 16-core, 288G RAM OS 11.6.1 Big Sur |
#45
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Quote:
__________________
-- Michael PT Ultimate Native 2021.10 Mac Pro 7,1 16-core, 288G RAM OS 11.6.1 Big Sur |
#46
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
There are definitely still very serious issues going on for me too. Although now the driver shows up every time, I am seeing very weird things happening with my monitors. For example, several times my second monitor would not turn on until switching monitor out puts a few times and restating a few times. Yesterday my computer (Mac Pro 7,1) turned on and the fan was running really loud and there was no Apple Chime and the monitors wouldn't turn on. I restarted multiple times and still nothing but loud fan noise. I shut down and then I unplugged everything including my HD interface and then powered back on and everything booted up fine and then I plugged everything back in and it is working again.
I have not had any of these issues previous to this Driver and the fact that the installer requires to not allow the computer to turn off the display or keeping the computer from sleeping, etc is an indicator to me that Avid must know that some of these issues are surrounding this new Driver release.
__________________
recording.guru : FREE Pro Tools Tips and 19 Video Basic Training Course Pro Tools HDX 2023.9 Mac Pro 7,1 3.2 GHz 16-Core Xeon W 160 GB RAM macOS 11.7.4 Noisebox Studios -Utah Recording Studio |
#47
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Installed HD Driver 2021.10 with Pro Tools 2021.10 on 2018 Intel Mac mini running Mac OS Big Sur 11.6 and Mac System Report shows Driver not installed after I confirmed installation in Library Extensions (Digital.kext shows Version 2110.0.67) My HDX card is not being seen in the Pro Tools Playback Engine window.
Pro Tools 2021.10 on 2018 Intel Mac mini running Mac OS Big Sur 11.6 Apogee Symphony II w/Pro Tools HD Card & Thunderbolt Card |
#48
|
||||
|
||||
Re: HDX Driver No Longer Shows after 2021.10 Install
Quote:
My solution to get at least my work done is every morning putting 2 lines in terminal. HDX card: sudo kextload /Library/Extensions/DigiDal.kext so for my RME card I looked what kext it had to be, so I checked /Library/Extension and there were more kext files and I tried them one by one until RME card showed up again.
__________________
PT Ultimate 2024.03.0, Avid S1, Eucon 2023.11 16" MacBookPro (2023) M2 Max 12-core, 64gb Ram, 1Tb SSD, OSX 14.4.1 MTRX v.2.4.2.2 + dante card + madi baseunit + optical SFP 1300nm MTRX-II v.1.0.5.2 + TB3 + 1x AD mic 8ch + 1x DA 8ch + madi baseunit + optical SFP 1300nm MOM v.1.0.1.4 by DAD Genelec 1237A Sam, Avantone active mixcubes LA2a (1968), 1073 pre/eq, Neve RNHP, Wacom Intuos Pro Furman P1400 AR E Power conditioner Live-rack: 1x HD Native TB, 4x 192 I/O (64ch AD) 8x Yamaha HA-8 micpre, Rosendahl mif4, Genelec 1031A, Presonus Monitor Station |
#49
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Here is what Avid told me to do, and it worked:
1. Check if manually loading the driver is successful using the following Terminal command (the Terminal utility is found in Applications > Utilities): sudo kextload /Library/Extensions/DigiDal.kext (Note: you will be prompted to enter an Administrator password to validate this command) After running the Terminal command you may see a system message regarding a security problem, which should then be fixed by going to System Preferences > Security & Privacy and pressing the "Allow" button (which you would normally be prompted to do immediately after installing the driver). 2. If this is not successful, try manually adding Avid drivers to the "allowed" list by doing the following: i. Boot the Mac into Recovery mode by holding down CMD-R while starting the computer. ii. In Recovery mode, open the Terminal utility, and enter the following command: /usr/sbin/spctl kext-consent add 4UYUA773XD Reboot the Mac into macOS whereupon the HD Driver should now be loaded. 3. If the kextload command initially successfully loaded the driver, but this needs to be repeated every time the computer starts up then the macOS prelinked kernel may need to be updated. The procedure is different depending on macOS version: On macOS Big Sur: i. Open Terminal from /Applications/Utilities and enter the following command (followed by the password): sudo touch /Library/Extensions ii. Restart the computer and boot into Recovery by holding down CMD-R. iii. Once in recovery, open the Terminal utility and enter the following command (this assumes the name of the system volume is "Macintosh HD"; if not adjust accordingly): kmutil trigger-panic-medic --volume-root “/Volumes/Macintosh HD” iv. Restart the computer back into macOS, open Terminal and enter the following command: sudo kmutil load -p /Library/Extensions/DigiDal.kext v. Go to System Preferences and see if it prompts to “Allow” the driver to load, then restart the computer once again. Sent from my iPhone using Tapatalk |
#50
|
|||
|
|||
Re: HDX Driver No Longer Shows after 2021.10 Install
Apologies for a quick digression here, to pose a question to folks on this thread - I'm a new HDX user as of last spring, currently running 2021.6 HDX on a 2009 Mac Pro flashed to 5,1 on Mojave, on an internal PCIe SSD. Things have been quite stable so far, so I am content. But I just noticed that a couple of annoying issues I've encountered (Mp3s being truncated on Import, bad ADC when printing from Aux tracks to Audio tracks) have been fixed in 2021.10. But this thread makes me super hesitant to upgrade to 2021.10. Should I be? Also, for now I'm using a non Apple-flashed graphics card, so going into Recovery Mode to do HD driver tweaks is a non-starter for me. Should I just sit tight in 2021.6? Thanks! As you were...
__________________
-------------------------------------------- 2009 Mac Pro 5,1, PT 2021.3.1, HDX, Mojave, RX 560, Apogee AD/DA-16X, HD I/O 8x8 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ipad no longer shows in Surfaces | SoundPark489 | Avid S1, S3, Dock and Control App | 4 | 07-24-2019 12:50 AM |
Downloaded Soundflower Apollo no longer shows up! | wedgewedge | Pro Tools 10 | 0 | 04-10-2014 06:48 PM |
Mbox 3 pro Just popped LOUDLY no longer shows firmware. | Intuition | FireWire & USB Audio Interfaces (Mac) | 5 | 10-14-2013 11:28 AM |
Plugin no longer on drive, but still shows up in menu in LE | mathiasriffman | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 7 | 06-11-2008 11:15 AM |
CD on desktop no longer shows a volumn in OS 9.2 | fifty8th1 | Pro Tools TDM Systems (Mac) | 0 | 08-24-2003 10:53 AM |