Sync IO OMNI HD Native

[[email protected]]

Hi
Hope help me please

I use pt10 hd native +Omni+ Sync IO

I couldn't understand how I should work with sync IO.

I connected them as a loop sync.
But I don't know which is the correct procedure: Should I set Sync IO first and then from "session setup" set my sessions accordingly? Or all settings must be set in "session setting" and Sync IO automatically gets them from PT?

[Drew Mazurek]

A few things:

First, you wrote native but you must mean that you have an HD Native card if you're using the Omni.

Second, why do you have the Sync I/O? Are you interfacing with other systems?

Once setup correctly, you would choose Sync I/O in the Session Setup menu

[[email protected]]

Originally Posted by Drew Mazurek

A few things:

First, you wrote native but you must mean that you have an HD Native card if you're using the Omni.

Second, why do you have the Sync I/O? Are you interfacing with other systems?

Once setup correctly, you would choose Sync I/O in the Session Setup menu

Hi
1-Yes I mean HD Native, and I guess that I wrote HD Native!
2-No, I bought it because I must pass 210 and 310 P and I need this device to understand it better.
3-you mean if I set session setup there is no need to set anything on Sync IO device?

[[email protected]]

When I select my clock Source to "Sync"(Io) and Clock Ref to "loop sync"in session Setup, clock source from Sync will be change to "HD Omni #1 -> internal"
Why?

[[email protected]]

Originally Posted by [email protected]

Hi
Hope help me please

I use pt10 hd native +Omni+ Sync IO

I couldn't understand how I should work with sync IO.

I connected them as a loop sync.
But I don't know which is the correct procedure: Should I set Sync IO first and then from "session setup" set my sessions accordingly? Or all settings must be set in "session setting" and Sync IO automatically gets them from PT?

I found perfect answer:

SYNC peripheral settings can be controlled in three ways:

1-From Pro Tools
Provides access to most SYNC peripheral controls from within the Pro Tools Session Setup window or the Synchronization page of the Peripherals window.
2-From the SYNC Peripheral Front Panel
Provides access to most controls from the front panel when using the SYNC peripheral in Standalone mode.
3-From the SYNC Setup Software Utility
(Windows Only)
This optional utility provides re- mote access to all SYNC peripheral controls from a supported Windows computer.

[Drew Mazurek]

Glad you got it sorted.

[GuZzB]

Hi guys!

I just opened a session i've been working on in my other studio in this new set up and PT10 wont find my OMNI HD even tho its working fine in Logic and as the main output for my mac.

Someone please help me !