|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#11
|
|||
|
|||
Re: Setting up transport controls with Oxygen in PT
Alright, I apologize, I tried to make too much of the tutorial. I installed the profile into the right folder, sure enough, there was CS-10 under the MIDI Controllers tab. I went into Enigma and fiddled around, eventually (I assume I did this right) assigned my transport buttons to the MMC commands, saved the preset, sent it to my Oxygen, and hoped for the best. Well, upon trial in PT, nothing happened again. I tried using the Enigma commands, then I tried using the commands from the Oxygen manual, but still nothing happens in Pro Tools.
|
#12
|
||||
|
||||
Re: Setting up transport controls with Oxygen in PT
Did you recall the preset number that you assigned the controls to on the oxygen? If not, it won't work.
__________________
My Website: Pro Tools "Newbie" Help Studio rig: Gigabyte GA-EX58-UD3R, Intel i7 920, 6GB Patriot DDR3, NVidia 8600GS, LG GGW-H20L BD-RE, Sony CRX195E1 CD-RW, 2x WD Caviar black 640GB (os swap), 1x WD caviar 320GB (sessions), 1x Maxtor 120GB (sessions), 1x Seagate 1TB (samples/loops), Profire2626, Command8, PT12 on OSX Mobile Rig: 2015 MacBook Pro Retina, Apollo Twin, PT12 |
#13
|
|||
|
|||
Re: Setting up transport controls with Oxygen in PT
Yes, I did. Again, isn't there supposed to be a MMC Slave box in the Perhipherals window under the MIDI machine tab? I don't have that box.
|
#14
|
||||
|
||||
Re: Setting up transport controls with Oxygen in PT
Did my tutorial say anything about MMC?
This has nothing to do with MMC. There must be something you are missing. With the problems that you have had so far, I think that is highly likely. (sorry... ) Try going through the tutorial again carefully. I've done this procedure successfully with 4 different devices; one dedicated control surface, and 3 different MIDI controllers (two of which have tutorials on my site).
__________________
My Website: Pro Tools "Newbie" Help Studio rig: Gigabyte GA-EX58-UD3R, Intel i7 920, 6GB Patriot DDR3, NVidia 8600GS, LG GGW-H20L BD-RE, Sony CRX195E1 CD-RW, 2x WD Caviar black 640GB (os swap), 1x WD caviar 320GB (sessions), 1x Maxtor 120GB (sessions), 1x Seagate 1TB (samples/loops), Profire2626, Command8, PT12 on OSX Mobile Rig: 2015 MacBook Pro Retina, Apollo Twin, PT12 |
#15
|
|||
|
|||
Re: Setting up transport controls with Oxygen in PT
Cool, I've got it working, but this new problem is kind of whack, and you mention nothing like this in your tutorial. I'm working on a session with a MIDI track right now, and any button I use EXCEPT the rewind button has no problem with the session at all, but if I use the rewind button at all, the MIDI track starts to play with overtones, almost sounding like feedback. But again, it's only if I use the rewind command for whatever reason. Play, stop, forward all work fine.
|
#16
|
|||
|
|||
Re: Setting up transport controls with Oxygen in PT
I took a quick look at my Xpand channel, and it turns out that the Resonance knob in Xpand turns all the way up when I press my rewind button. Any thoughts on how that's fixed?
|
#17
|
|||
|
|||
Re: Setting up transport controls with Oxygen in PT
Alright, sorry for the triple post. Another problem is that either after a few minutes, or after I use one of the CC knobs, all the transport command buttons stop working. I have to completely exit out of PT and start again in order for it to work again.
|
#18
|
||||
|
||||
Re: Setting up transport controls with Oxygen in PT
Congratulations! Gald you got it working. Finally...
Quote:
Quote:
__________________
My Website: Pro Tools "Newbie" Help Studio rig: Gigabyte GA-EX58-UD3R, Intel i7 920, 6GB Patriot DDR3, NVidia 8600GS, LG GGW-H20L BD-RE, Sony CRX195E1 CD-RW, 2x WD Caviar black 640GB (os swap), 1x WD caviar 320GB (sessions), 1x Maxtor 120GB (sessions), 1x Seagate 1TB (samples/loops), Profire2626, Command8, PT12 on OSX Mobile Rig: 2015 MacBook Pro Retina, Apollo Twin, PT12 |
#19
|
|||
|
|||
Re: Setting up transport controls with Oxygen in PT
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Setting up Yamaha KX-49 midi controller transport controls?? | JLiRD808 | Pro Tools 10 | 0 | 09-28-2012 02:01 PM |
DAE Transport controls inoperative | Nick Cancilla | Pro Tools HDX & HD Native Systems (Win) | 7 | 08-01-2012 01:02 PM |
Plugs (BFD) not following PT transport controls. | ChuckS | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 06-16-2009 07:13 AM |
Transport Controls | russrags | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 10 | 03-08-2009 03:02 AM |
Transport Controls | blorge | Digidesign Hardware & Software | 7 | 04-15-2001 03:21 PM |