|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
ADAT as ad/da
Hi
Does anyone know whether or not it is possible to use an Adat machine as both a/d and d/a at the same time? If so, how do I configure it to do so? Any feedback or info regarding this subject will be greatly appreciated. Espen
__________________
IMDB |
#2
|
|||
|
|||
Re: ADAT as ad/da
Wanted to *BUMP* this cause I was wondering about it , slightly differently, like has anyone used an old ADAT as their A/D interface to take advantage of the ADAT optical connect? Would that be a cheapo way to use the 8 ADAT ports [img]images/icons/confused.gif[/img] ???
__________________
Will work for gear |
#3
|
|||
|
|||
Re: ADAT as ad/da
Quote:
A/D - ADAT in normal mode (digital input de-selected). Whatever is coming in on the analog inputs whether they are set to all input mode or rec armed in auto input mode is converted and sent to both the analog outputs and the lightpipe output. D/A - ADAT in 'digital input' mode, anything coming in on the lightpipe input is converted and sent to the ADAT analog outputs, provided you are in all input mode or the tracks are rec armed. Switching to digital input mode disconnects the analog inputs from the A/D conversion stage, this is the gotcha. So you can use the ADAT for 8 more inputs while tracking (provided you monitor from PT on outputs 1-8 or the SPDIF). During mixdown you can use the ADAT for 8 more outputs (in digital input mode). Be careful of your clocking particlarly with blackface ADATs without a BRC the ADAT must be clock master during A/D, and clock slave during D/A. From the XT's onwards you can independently set the clock source. Cheers, Marcus |
#5
|
|||
|
|||
Re: ADAT as ad/da
Also the converters on ADATS are average at best. If you want to have an extra 8 ins via ADAT go for an Octopre from focusrite and you will also get 8 decent mic pres too! [img]images/icons/grin.gif[/img]
__________________
Audio Engineer/Musician/Producer |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ever had a Yamaha ADAT card go bad? 01V's ADAT won't work. | scoobydoo | Pro Tools TDM Systems (Mac) | 2 | 03-02-2008 10:45 AM |
ADAT to PTMixPlus via ADAT bridge...digital pops? | Phattlippz | Digidesign Hardware & Software | 2 | 05-28-2006 05:13 PM |
ADAT IN works fine - but dont get Output via ADAT | kaladun | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 10-08-2005 04:15 PM |
Digi001 ADAT, Alesis ADAT Edit and Fostex VM00 | phobia | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 03-24-2001 08:57 AM |
cable lenght (fiberoptics) adat to adat bridge | olek | Pro Tools TDM Systems (Mac) | 10 | 02-21-2000 07:47 PM |