D-Command with 2022.10

[Skwaidu]

Any users here?

I have it working on Ultimate, but it drops occasionally, maybe 1-2 times a day, but not every day. I'm not sure if it's starting to have glitches due to not being supported anymore or if I have trouble brewing in the network switch that is in the Ethernet chain between the machine and the D-Command.

Windows 11 21H2.

[Will Russell]

The power supplies in these units, especially the old blue ones are pretty old and might need to be replaced. I had a problem with my Xmon going off-line randomly, and the problem is solved by replacing the power supply

[Skwaidu]

Originally Posted by Will Russell

The power supplies in these units, especially the old blue ones are pretty old and might need to be replaced. I had a problem with my Xmon going off-line randomly, and the problem is solved by replacing the power supply

Okay, damn. But the symptom was just that the connection dropped? My unit still stays on, just loses PT connection. Also, PT crashes if I try to disable Icon, but switching to Eucon and then back works (so does seem like a PT bug to me).

FWIW I'm on the grey ES one, 24 faders.

[Will Russell]

My. XMON would mute itself and stop passing audio intermittently..the unit would remain powered on.

Impending D-Command power supply failures often show up as intermittent behavior rather than just not powering up.

If you are simply losing connection with PT I would try troubleshooting the Ethernet connection first in hopes of a cheaper fix…

These folks have been very helpful with troubleshooting advise and also have lots of parts for D-Commands like power supplies, faders, LEDs etc
https://advancedmusical.com/

[Skwaidu]

Originally Posted by Will Russell

My. XMON would mute itself and stop passing audio intermittently..the unit would remain powered on.

Impending D-Command power supply failures often show up as intermittent behavior rather than just not powering up.

If you are simply losing connection with PT I would try troubleshooting the Ethernet connection first in hopes of a cheaper fix…

These folks have been very helpful with troubleshooting advise and also have lots of parts for D-Commands like power supplies, faders, LEDs etc
https://advancedmusical.com/

Okay, thanks. Yes, need to double-check the ethernet although it should be good, new cabling and switch which all worked great for a year.

FWIW I don't use XMon anymore, went MTRX Studio already, I guess the D-Command will go to be replaced with some S1's at some point as well.

[Led]

Mine's working fine with 2022.10 on win10. Maybe try bypassing the switch and connect direct to see if it's a problem there?