|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
003 stays "offline" in PT
When I launch PT is launches fine but my 003 stays Offline and my sessions that I open are screwy with the choices for my inputs. I can play the session and hear it via my computer speaker but can not record, etc.
If I close out of PT and launch safari and play a youtube video the 003 comes online and the sound plays through my monitors. Any ideas?
__________________
One Mad Son The only difference between me and a madman is that I am not mad S. Dali |
#2
|
|||
|
|||
Re: 003 stays "offline" in PT
also, when PT opens a session it says "Your I/O set up has changed since your last session. Some inputs have been made inactive"
???
__________________
One Mad Son The only difference between me and a madman is that I am not mad S. Dali |
#3
|
|||
|
|||
Re: 003 stays "offline" in PT
one other thing is that when i get the report for what has changed it says all the tracks other than Analog 1 and 2 are NA. For specific tracks it says the following.
"Track "Audio 1.01" (audio) input "Analog 8" has been made inactive because the input path is currently not available."
__________________
One Mad Son The only difference between me and a madman is that I am not mad S. Dali |
#4
|
||||
|
||||
Re: 003 stays "offline" in PT
|
#5
|
|||
|
|||
Re: 003 stays "offline" in PT
It's likely that you need to open the playback engine in the setup tab and change back to the digi003..
If you started PT without the 003 being on it reverts to whatever is available and stays that way until you change it.
__________________
Here I am, after time not long... and thankful for the break, What I found when I got there, was that I couldn't stay away! Hobo Shave! |
#6
|
|||
|
|||
Re: 003 stays "offline" in PT
That did the trick. So this would occur if I started Protools without the 003 on? I know I've done that before and what has happened is that I get a message saying something like "there is no PT hardware for the system so PT won't launch". This appears to be different behavior.
Thanks. Intel Dual 2.66 OSX 10.6.3 7 Gig Ram 667 Mhz DDRs FB-DIMM PT 9.0
__________________
One Mad Son The only difference between me and a madman is that I am not mad S. Dali |
#7
|
||||
|
||||
Re: 003 stays "offline" in PT
With PT9, you can run with no Avid hardware attached, thus the change in prompts.
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
#8
|
||||
|
||||
Re: 003 stays "offline" in PT
Also remember when PT is booting, hold down the N key to open up interface window to select your interface.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mbox Pro 3 blue light stays on but has the status of "Hardware not connected" | Focuret | FireWire & USB Audio Interfaces (Mac) | 1 | 01-15-2014 12:18 AM |
Edit softkeys not possible, Eucontrol stays "in focus" | johngar | Artist Series | 6 | 05-20-2013 06:12 PM |
Does "Westmere" qualification apply to "Bloomfield" and "Gulftown" also? | bashville | Pro Tools 10 | 5 | 03-23-2013 03:04 PM |
Main unit of my D-control says "offline" | corbittclam | ICON & C|24 | 2 | 06-09-2011 12:56 PM |
What's the difference between "online" and "offline" editing ? | stuu | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 4 | 02-21-2002 03:46 PM |