|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Not recognizing optical inputs 17-24(Profire 2626). Help needed.
Hey guys,
I wanted to record 24 inputs for a quick demo this weekend w/ my Profire 2626 so I borrowed two of my friends Motu 8pre's to run into my Profire 2626 via ADAT ports A and B to get myself there. My connections are as followed Profire ADAT A out ---> MOTU(1) ADAT 1-8 in(clock synced to external no issues) MOTU(1) ADAT 1-8 out ---> Profire ADAT A in Profire ADAT B out ---> MOTU(2) ADAT 1-8 in(clock synced to external no issues) MOTU(2) ADAT 1-8 out ---> Profire ADAT B in All of the units are synced and I can see any input lighting up and I can monitor any one of them in on the Profire 2626 dsp mixer In pro tools the default inputs were 16 so I created 8 more to give me 24 and I had the set up as this. Analog 1-8 Optical 9-24 The issue is that I'm seeing no signal in pro tools from the optical inputs 17-24, which would be the 2nd Motu 8pre in the chain. Now I can see levels on the Motu and I can even monitor and hear the signal on the internal dsp mixer..but nothing comes into pro tools. Any help or suggestions is appreciated. |
#2
|
||||
|
||||
Re: Not recognizing optical inputs 17-24(Profire 2626). Help needed.
Hi,
Just a few things to check, but I'm not sure how the profile works in relation to the hardware setup, but check... Setup/hardware... make sure the various inputs 1-8 / 9-16 / 17-24 are all assigned to the desired analogue or adat inputs. Check if anything here needs to be selected as digital adat for the 17 - 24 inputs to work. Setup/ I/O all inputs have been created and assigned to the right inputs on the hardware. The boxes are ticked for the inputs to be active. Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#3
|
|||
|
|||
Re: Not recognizing optical inputs 17-24(Profire 2626). Help needed.
Pro Tools is a PIA for this and it's a real gotcha.
Go in to the i/o window and under the input and output tabs press 'Default'. VOILA! If you regularly change interfaces then you need to almost do this as a matter of course, saving some custom i/o setups is always a good thing too!
__________________
iMac i5 2.8GHz, Macbook Pro 2.4GHz, Pro Tools 10/11, MOTU 828mk2, Presonus Digimax FS, Presonus Firestudio Project, TC Konnekt 24D --- iCON Photography |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Profire 2626 Inputs | obiwan177 | Tips & Tricks | 7 | 08-03-2010 10:03 PM |
Only 4 inputs for profire 2626? | barters81 | Pro Tools M-Powered (Mac) | 1 | 05-01-2010 05:07 PM |
Profire 2626 analog INputs 3-8 Don't show up | norton | Pro Tools M-Powered (Mac) | 3 | 11-06-2009 10:38 PM |
M-powered not recognizing my Profire 2626 | mburton21 | Pro Tools M-Powered (Win) | 8 | 06-16-2009 10:39 PM |
advice needed: PPC G5 with 2x Profire 2626?? | martthie_08 | Pro Tools M-Powered (Mac) | 6 | 12-05-2008 03:53 AM |