|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
888/24 and Pro tools 6.x
i recently upgraded to OS X 10.2.8 and PT 6.1 i have 2 888/24's in my TDM system. the install went fine but when i went to set up my hardware, selected peripherals 1 and 2 corresponding to the 2 888's, the second 888 was not responding. (888 #1 is cabled to the mix core, 888 #2 is cabled to the mix farm). as a test, i went back to the hardware setup window, selected as a 3rd peripheral, a third 888/24. this phantom 888 doesnt exist, but once selected in the hardware set up window, it caused my 2nd 888 to respond. anybody have a clue as to why this is? in my IO setup, it now appears as if i have 3 888's in my system.
thanks. jeff |
#2
|
|||
|
|||
Re: 888/24 and Pro tools 6.x
Each interface card can support two interfaces. If you have three cards and connect one 888/24 to each of the first two cards, it would look like this
<888/24> <no interface> <888/24> <no interface> <no interface> <no interface> But if you connected both 888/24s to the first card through a y-cable, it would be: <888/24> <888/24> <no interface> <no interface> <no interface> <no interface> Cheers, Chris
__________________
http://www.ripplefx.com Mac Pro 8 core 3.0GHz Harpertown Magma PE6R4I - HD 3 Accel +1 Process Control 24 - 96io - 1622 OSX 10.6.8 - PTHD 10.3.10 |
|
|