|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Carbon DB25 - Phase Issues
I freely admit that I may be missing something obvious, but I am using a DB25 to 1/4" TRS for the line outputs. I have lines 1/2 running to a mixer to blend with live inputs (not DAW related), but they are playing out of phase. The I/O is set up property (I think), and there is plenty of volume, but out of phase. The mixer takes balanced inputs. I also tried lines 3/4, and running into other devices as well. Thoughts, or am I missing something? Thanks in advance.
- Bryan |
#2
|
|||
|
|||
Re: Carbon DB25 - Phase Issues
What firmware are you on for the Carbon? (Also, since firmware is tied to Pro Tools, which Pro Tools?)
There was a phase/polarity issue with the Carbon (you can find the mention of it in the forum) that was fixed with a later firmware.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#3
|
|||
|
|||
Re: Carbon DB25 - Phase Issues
Quote:
System: Pro Tools 2021.12.0, AVID Carbon, Mac-mini (M1, 2020) - 16GB running OS 12.0.1 I also reviewed other posts and was only able to see information on issues with phase using hardware inserts and nothing (that I saw) specifying upgrading firmware. Any help is appreciated. Last edited by bryanchughes; 01-23-2022 at 02:57 PM. |
#4
|
|||
|
|||
Re: Carbon DB25 - Phase Issues
Updating on this, I reached out through the AVID support center only to get a response that was associated with inputs, not outputs...my guess is they didn't read my question? In anywise, I responded immediately and have heard nothing back since. I reached out on the ticket again, so we'll see what comes of it.
|
#5
|
||||
|
||||
Re: Carbon DB25 - Phase Issues
Hi Bryan,
Are you seeing this issue across all your sessions? Are you using hardware inserts? Which plug-ins are you using? If you wouldn't mind doing a quick test and create a session with one stereo track (no inserts, plug-ins, etc) to see if you experience the same behavior and please let me know. Thanks, JW AVID Sr. Principal Product Manager - Pro Tools Hardware |
#6
|
|||
|
|||
Re: Carbon DB25 - Phase Issues
Thank you but this is resolved now, and was my fault. Ultimately it wasn't Carbon, but rather the particular channel of the mixer I plugged the DB25 outputs into, was wired out of phase. I switched to a different strip on the mixer and it worked fine. My apologies, but thank you for the follow-up. Now only if PT 12 would work with the Apple M1 chip including all the plug-ins, then all would be well.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carbon Phase issues with hardware inserts | alhardy | Pro Tools | Carbon | 5 | 08-10-2023 11:03 AM |
More Carbon Sync Issues...Must Get Solved... | tomhartman | Pro Tools | Carbon | 88 | 03-25-2023 10:24 AM |
FS: Avid DigiSnake 12 ft. DB25 to DB25 Cable (9940-29651-00) | TVPostSound | Buy & Sell | 0 | 03-27-2017 12:14 PM |
DB25 Male to DB25 Female Ext. Cable | Barry Johns | Pro Tools HDX & HD Native Systems (Mac) | 11 | 06-12-2016 11:30 AM |
Anyone know if a Tascam CU/SD105 db25 to db25 will do the job? | juniperjuniper | Pro Tools TDM Systems (Mac) | 2 | 05-22-2002 12:30 AM |