Sub Not Working

[uvtube]

Hi

Sorry if this is in the wrong forum ...

I have a Samson Rubicon 10 inch Subwoofer and a pair of 5inc active studio monitors plugged in to the rear inputs of my M-Audio Fast Track C400. The sub in to the '3-4' inputs and the monitors in the '1-2' outputs.

Th monitors work fine, but the sub does not. I tried reversing the setup and then the monitors do not work from the '3-4' inputs.

What am I doing wrong ?

Thanks in advance.

[Meads]

I'm sure you mean outputs 3+4. The interface only has two inputs, and besides connecting speakers to inputs is like shoving food up your... You get the picture.

You need to connect outputs 1+2 of your interface to the two inputs of the subwoofer and the two outputs of the subwoofer two your speakers.

[albee1952]

Most subwoofers have inputs that feed a crossover, and outputs to feed the mid/hi speakers. The MAIN ouputs of the Mbox should go to the sub, and out of the sub to the top speakers.

[afx75]

Originally Posted by uvtube

Hi

Sorry if this is in the wrong forum ...

I have a Samson Rubicon 10 inch Subwoofer and a pair of 5inc active studio monitors plugged in to the rear inputs of my M-Audio Fast Track C400. The sub in to the '3-4' inputs and the monitors in the '1-2' outputs.

Th monitors work fine, but the sub does not. I tried reversing the setup and then the monitors do not work from the '3-4' inputs.

What am I doing wrong ?

Thanks in advance.

Hi, i have big problems with the outputs of my Fast Track C400.
Only output 1 transmits a low sound and distorted, outputs 2, 3 and 4 do not give any transmission.
ASIO drivers with some programs can not be used.

Congratulations to avid