|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Please help with 'Cannot initialize device...' when hitting play
I upgraded to a Tascam US 16x08 interface, and it works fine with my Windows 10 / Protools 11 System.
Except when I get a session that is in a different sample rate. Then when I open the session and hit play, Protools says ' Can't initialize device US-16x08 ...' So as long as I only use sessions at 48k, then I am fine. But when I go to open a 44.1k session I get the error, and I am stuck there. But the solution is if I start a new blank session at 44.1k, and the close it and open the session it is fine. But now when I go back to opening the 48k session, we start all over again with the error message and I have to start a blank session at 48k. Please help, I have looked through the DUC and don't see a resolution, but I did find this work around. Is there a solution to this? Here is my system: Computer Model : OEM System Product Name Serial Number : System Ser********** Chassis : Default string Desktop Mainboard : ASUS PRIME Z390-A Serial Number : 1904496******** BIOS : AMI (OEM) 0905 04/10/2019 Intel Management Engine (ME) : 12.0.22.1310 Total Memory : 16GB DIMM Processors Processor : Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz (8C 4.6GHz, 4.3GHz IMC, 8x 256kB L2, 12MB L3) Socket/Slot : FC LGA1151 Chipset Memory Controller : ASUS Core8S (Coffeelake-S 8C) Host Bridge/DRAM Registers 100MHz, 2x 8GB DIMM 2.13GHz 128-bit Memory Module(s) Memory Module : G.Skill/Hynix (Hyundai) F4-3200C16-8GVKB 8GB DDR4 1Rx8 PC4-25600U DDR4-3200 (15-15-15-36 4-51-16-5) Memory Module : G.Skill/Hynix (Hyundai) F4-3200C16-8GVKB 8GB DDR4 1Rx8 PC4-25600U DDR4-3200 (15-15-15-36 4-51-16-5) Video System Monitor/Panel : FNI MAGNAVOX (1600x1200) Video Adapter : NVIDIA GeForce GT 710 (192S 1C SM5.5 953MHz, 512kB L2, 2GB 1.6GHz 64-bit, PCIe 2.0 x8) Graphics Processor CUDA : NVIDIA GeForce GT 710 (192S 1C SM3.5 953MHz, 512kB L2, 2GB 1.6GHz 64-bit) OpenCL : NVIDIA GeForce GT 710 (192S 1C SM1.2 953MHz, 512kB L2, 2GB 1.6GHz 64-bit) D3D 11 : NVIDIA GeForce GT 710 (192S 1C SM11.5 953MHz, 512kB L2, 2GB 1.6GHz 64-bit) OpenGL : NVIDIA Corporation GeForce GT 710/PCIe/SSE2 (2GB) Storage Devices Disk : WDC WD5000AADS-00S9B0 (500.1GB, SATA300, 3.5", 32MB Cache) Disk : WDC WD5000AADS-00S9B0 (500.1GB, SATA300, 3.5", 32MB Cache) Disk : WDC WD5000AZLX-00K4KA0 (500.1GB, SATA600, 3.5", 7200rpm, 32MB Cache) Optical : Optiarc DVD RW AD-7240S (SATA150, DVD+-RW, CD-RW) Logical Storage Devices music (M:) : 466GB (NTFS, 4kB) @ WDC WD5000AADS-00S9B0 (500.1GB, SATA300, 3.5", 32MB Cache) Hard Disk (D:) : 465GB (NTFS, 4kB) @ WDC WD5000AADS-00S9B0 (500.1GB, SATA300, 3.5", 32MB Cache) Music2 (C:) : 465GB (NTFS, 4kB) @ WDC WD5000AZLX-00K4KA0 (500.1GB, SATA600, 3.5", 7200rpm, 32MB Cache) Hard Disk : 831MB (NTFS, 4kB) @ WDC WD5000AADS-00S9B0 (500.1GB, SATA300, 3.5", 32MB Cache) Hard Disk : 823MB (NTFS, 4kB) @ WDC WD5000AZLX-00K4KA0 (500.1GB, SATA600, 3.5", 7200rpm, 32MB Cache) Optical Drive (E:) : N/A @ Optiarc DVD RW AD-7240S (SATA150, DVD+-RW, CD-RW) Peripherals LPC Hub Controller : ASUS Z390 (Cannon Point) LPC/eSPI Controller Audio Device : ASUS ICH300 (Cannon Point) cAVS Audio Codec : Realtek Semi 1168 Audio Codec : 32768 0000 Audio Device : MSI GK208 HDMI/DP Audio Controller Audio Codec : nVidia nForce4 ISA Bridge Serial Port(s) : 1 Disk Controller : ASUS ICH300 (Cannon Point) Shared SRAM Disk Controller : ASUS ICH300 (Cannon Point) SATA AHCI Controller USB Controller : ASUS ICH300 (Cannon Point) USB 3.1 xHCI Host Controller SMBus/i2c Controller : Intel ICH SMBus Printers and Faxes Printer : Microsoft Software Printer Driver (300x300, Colour) Printer : Microsoft XPS Document Writer v4 (600x600, Colour) Printer : Microsoft Print To PDF (600x600, Colour) Printer : HP ENVY Photo 7800 series PCL-3 (600x600, Colour) Printer : Foxit Reader PDF Printer Driver (2400x2400, Colour) Fax : Microsoft Shared Fax Driver (200x200) Printer : hp LaserJet 3030 PCL 5 (600x600, USB) Scanners & Cameras Scanner : Microsoft HP68B95B (HP ENVY Photo 7800 series) (Scanner, USB) Biometrics Voice : Analog NUI Voice Virtual Sensor (Voice) Network Services Network Adapter : Intel(R) Ethernet Connection (7) I219-V (Ethernet, 1Gbps) Operating System Windows System : Microsoft Windows 10 Personal 10.0.19042 Platform Compliance : x64 Performance Enhancing Tips Warning 2513 : TPM not detected. Some security features are unavailable. Tip 3 : Double-click tip or press Enter while a tip is selected for more information about the tip.
__________________
DC-Choppah's Project Studio: ASUS PRIME Z390-A / Intel i7 rackmount PC Windows 10 home 64 bit Pro-Tools 11.3.1 AIR Instrument Expansion Pack v2 WAVES Platinum plugin bundle Tascam US-16x08 Interface 100% Analog real time monitoring 16x4 Yamaha 16 channel MG16XU Analog Monitor Mixer Yamaha MX-88 / Novation XiO keyboards Mackie 4-channel headphone amp Adam A8X monitors Blue / Shure, etc. microphones Estonia 6' 8" Parlor Grand Piano Yamaha Studio Drum kit https://www.dc-choppah.com/ |
#2
|
|||
|
|||
Re: Please help with 'Cannot initialize device...' when hitting play
Make sure Windows isn’t using your Tascam as the “default sound device.” Avid is a diva (which oddly enough is avid spelled backwards) and doesn’t like to share the hardware. Assign all Windows sounds to the onboard soundcard, and let Pro Tools have the Tascam.
|
#3
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Quote:
Windows default output/input device is set to be my Realtek audio device. Windows sounds play from that Realtek device. Under the advanced section of the windows sound device settings, I can also see that Protools is set to use the Tascam for input and output, while all windows sounds are set to use the 'Default'. And default is set to be the Realtek. In the Windows control panel, the Realtek is set to be the default. I still cannot switch to a Protools session with a different sample rate - unless I first create a new blank session at that new rate. When in this 'can't initialize US 16x08...' state, closing Protools takes forever (like 20 minutes?!?) which is of course terrible with a room full of musicians!! So I end up forcing it to close. Sweetwater says to hold down N while Protools boots. This lets me see a list of audio devices to use. My choices are Realtek, and Tascam. So I chose Tascam, but the problem remains. Yet, if I tell Protools to create a new blank session at the new sample rate, I can close that new session, and Protools is now in a state that it opens the desired session at the new rate. So Protools is able to initialize this interface. It seems, but only by creating a new session?!? I sent a request to Tascam but they have not responded. I can't tell if this is a problem with Windows, Tascam or Protools!?! It sure seems like a Protools problem since Protools is able to initialize the Tascam by creating a new session at the new rate.
__________________
DC-Choppah's Project Studio: ASUS PRIME Z390-A / Intel i7 rackmount PC Windows 10 home 64 bit Pro-Tools 11.3.1 AIR Instrument Expansion Pack v2 WAVES Platinum plugin bundle Tascam US-16x08 Interface 100% Analog real time monitoring 16x4 Yamaha 16 channel MG16XU Analog Monitor Mixer Yamaha MX-88 / Novation XiO keyboards Mackie 4-channel headphone amp Adam A8X monitors Blue / Shure, etc. microphones Estonia 6' 8" Parlor Grand Piano Yamaha Studio Drum kit https://www.dc-choppah.com/ Last edited by DC-Choppah; 06-20-2021 at 01:50 PM. |
#4
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Google tells me to allow access to the MIC:
http://forum.cakewalk.com/Cakewalk-w...-m3761002.aspx Mic Permissions in Windows Privacy Settings "had issues getting the 16x08 to work with any DAW after the Windows 10 1803 update. It was a Mic permissions problem. Try enabling access to the mic (and maybe camera) in Windows Settings>Privacy>Microphone." Whereas: https://duc.avid.com/showpost.php?p=2472106&postcount=7 I GOT IT!! disabling my lappy playback/record devices did the trick Quote:
Realise you’ve got your onboard Realtek as your default in Sound’s “Playback” tab Wanted to check if you also selected your Tascam as your default in Sound’s “Recording” tab, by clicking on the Tascam, then hitting the “Set Default” button, then the “OK” button – then restart computer? More suggestions, if you've already done the above: Tascam US-16x08 | Firmware and Driver Downloads: https://www.tascam.eu/en/downloads/current/US-16x08 Even if you’re up to date here, you could uninstall your current driver, restart the PC, then do a new install You could roll back to previous version of Windows 10 https://www.itechguides.com/how-to-r...ows-10-update/ Right-click Windows 10 menu and click Settings. At Windows Settings, scroll down and click Update & Security. On the left pane, click Recovery. On the Go back to the previous version of Windows 10 section, click Get started. US-16x08 not workin after Windows 10 update | TASCAM Forums https://www.tascamforums.com/threads...0-update.5492/ “I just installed Windows 10 from 7 with all of its updates and the US16x08 is working as it should.” So, if nothing else works, revert to Windows 7 Install Tascam’s (x64) Drivers/Firmware on Windows 7 Install QuickTime Essentials Download Microsoft’s Media Creation Tool (MediaCreationTool21H1) for free update from Windows 7 to Windows 10, with all files intact, by clicking the 2nd button (“Download tool now”) on this page: Download Windows 10 (microsoft.com) https://www.microsoft.com/en-au/soft...load/windows10 How to Upgrade for Free to Windows 10 Home or Pro https://youtu.be/QdNL-pvvXH4 Recommended reading: Only install QuickTime Essentials, the bare minimum QuickTime Component required for Pro Tools, as explained here: Is Apple Quicktime A Security Risk For Windows Pro Tools Users? https://www.pro-tools-pc.com/apple-q...security-risk/ Windows Data Collecting And Phone Home Features https://www.pro-tools-pc.com/windows...ng-phone-home/ Windows Data Collecting And Phone Home Features Part 2 https://www.pro-tools-pc.com/data-co...-phone-home-2/ Just pick the version of W10 that matches your W7: Home for Home and Pro/Ultimate for Pro.
__________________
Pro Tools Studio 2024.3 * Studio One Pro 6.6 * Harrison Mixbus 10 Pro * SSL UC-1 * Digidesign Command 8 * TECH 21 SansAmp 2.0 * Xvive U3 2.4Ghz Wireless Microphone * Shure SM57 & Rode NT2-A * Fender 30 & Champ 12 valve amps * M-Audio Axiom Pro 49 & Air 32 MINI * PreSonus Speakers & Monitor Station V2 * Lenovo W520 laptop Type 427637U (32 GB RAM) with extra-Ports Dock * 3 TB Samsung SSDs * 3 Screens: 15.6” Laptop & 24” BENQ LED GL2450-B & Samsung 27” CT550 curved Monitor Last edited by unkJE; 06-21-2021 at 04:37 AM. Reason: hope the first suggestion is the fix! |
#5
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Thank you, but no luck here.
I do have the Tascam set as the input Mic device. I do have the Mic set to allow apps to use it. I do have the latest firmware and driver. No I am not going back to Windows 7 for this. My only practical solution is that I strictly work in only 48k. When I get a session in 44.1k I save a copy and change to 48k. Sad but true. If anyone stumbles on this and has the same problem, and finds a solution, please update.
__________________
DC-Choppah's Project Studio: ASUS PRIME Z390-A / Intel i7 rackmount PC Windows 10 home 64 bit Pro-Tools 11.3.1 AIR Instrument Expansion Pack v2 WAVES Platinum plugin bundle Tascam US-16x08 Interface 100% Analog real time monitoring 16x4 Yamaha 16 channel MG16XU Analog Monitor Mixer Yamaha MX-88 / Novation XiO keyboards Mackie 4-channel headphone amp Adam A8X monitors Blue / Shure, etc. microphones Estonia 6' 8" Parlor Grand Piano Yamaha Studio Drum kit https://www.dc-choppah.com/ |
#6
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
The Mbox Pro lets me change the Sample Rate and the Preferred Buffer Size – restart computer – before launching Pro Tools
Don’t know if you do the same, but this is the order I follow - I restart computer each time I change a Setting: Windows ‘Sound’ Playback tab - set Default (Onboards sound) – hit OK – restart computer Windows ‘Sound’ Recording tab - highlight Line 1&2 (or other Interface Input, if required) - set Default – hit OK – restart computer Turn off computer Turn on Mbox Pro/Tascam Turn on computer Launch Pro Tools
__________________
Pro Tools Studio 2024.3 * Studio One Pro 6.6 * Harrison Mixbus 10 Pro * SSL UC-1 * Digidesign Command 8 * TECH 21 SansAmp 2.0 * Xvive U3 2.4Ghz Wireless Microphone * Shure SM57 & Rode NT2-A * Fender 30 & Champ 12 valve amps * M-Audio Axiom Pro 49 & Air 32 MINI * PreSonus Speakers & Monitor Station V2 * Lenovo W520 laptop Type 427637U (32 GB RAM) with extra-Ports Dock * 3 TB Samsung SSDs * 3 Screens: 15.6” Laptop & 24” BENQ LED GL2450-B & Samsung 27” CT550 curved Monitor |
#7
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
__________________
Mac mini M2 16GB RAM macOS 13.4.1. PT Studio 2023.6. Topping E30 II DAC, Dynaudio BM6, 2 x Artist Mix, SSL UC1, Control on iPad. |
#8
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Quote:
Backup – or better still, clone your drive before upgrading. You can still upgrade Win 7 Pro to Win 10 Pro for free, without losing your files, instead of having to wipe out your device clean, with Microsoft’s MediaCreationTool21H1 – it’s the 2nd blue button (Download tool now) on this page: https://www.microsoft.com/en-au/soft...load/windows10 Please read: Is Apple Quicktime A Security Risk For Windows Pro Tools Users? https://www.pro-tools-pc.com/apple-q...security-risk/ See: “Installing the bare minimum Quicktime Components Required for Pro Tools - disable all options except the "Quicktime Essentials" Windows Data Collecting And Phone Home Features https://www.pro-tools-pc.com/windows...ng-phone-home/ Windows Data Collecting And Phone Home Features Part 2 https://www.pro-tools-pc.com/data-co...-phone-home-2/ How to Upgrade for Free to Windows 10 Home or Pro https://youtu.be/QdNL-pvvXH4 albee1952 (Dave) – Quote:
__________________
Pro Tools Studio 2024.3 * Studio One Pro 6.6 * Harrison Mixbus 10 Pro * SSL UC-1 * Digidesign Command 8 * TECH 21 SansAmp 2.0 * Xvive U3 2.4Ghz Wireless Microphone * Shure SM57 & Rode NT2-A * Fender 30 & Champ 12 valve amps * M-Audio Axiom Pro 49 & Air 32 MINI * PreSonus Speakers & Monitor Station V2 * Lenovo W520 laptop Type 427637U (32 GB RAM) with extra-Ports Dock * 3 TB Samsung SSDs * 3 Screens: 15.6” Laptop & 24” BENQ LED GL2450-B & Samsung 27” CT550 curved Monitor |
#9
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Something else:
With my system set up for 48K session in Protools: if I go into the Windows control panel for the Tascam 16x08 and go to properties/advanced and hit the test tone, windows says 'failed to play test tone'. I do not even have Protools running. Protools is closed and I get this error from Windows when testing the TASCAM. The control panel shows the TASCAM set to 48/24 which matches my Protools sessions. If I change the windows control panel to 44.1/24 now the test tone plays. So I opened the Tascam driver's settings panel, I can see that the TASCAM is set to 44.1k. I can see that when I change the setting in Windows and hit apply, sometimes the TASCAM shows the change and sometimes not. It is inconsistent. Whenever I have a match in the setting (48k or 44.1k ) between windows and the TASCAM, the test tone plays. When they are unmatched the test tone fails. I can't figure the rhyme or reason why sometimes the apply button works but other times it does not.
__________________
DC-Choppah's Project Studio: ASUS PRIME Z390-A / Intel i7 rackmount PC Windows 10 home 64 bit Pro-Tools 11.3.1 AIR Instrument Expansion Pack v2 WAVES Platinum plugin bundle Tascam US-16x08 Interface 100% Analog real time monitoring 16x4 Yamaha 16 channel MG16XU Analog Monitor Mixer Yamaha MX-88 / Novation XiO keyboards Mackie 4-channel headphone amp Adam A8X monitors Blue / Shure, etc. microphones Estonia 6' 8" Parlor Grand Piano Yamaha Studio Drum kit https://www.dc-choppah.com/ |
#10
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Quote:
Tips from the Manual: p.6 Installing the driver and Settings Panel for Windows Complete installation of the driver on the computer before connecting the unit to it with the USB cable. If you already connected the unit … p. 26 Troubleshooting Change the USB port and reinstall the Driver (more Tips to try on this page)
__________________
Pro Tools Studio 2024.3 * Studio One Pro 6.6 * Harrison Mixbus 10 Pro * SSL UC-1 * Digidesign Command 8 * TECH 21 SansAmp 2.0 * Xvive U3 2.4Ghz Wireless Microphone * Shure SM57 & Rode NT2-A * Fender 30 & Champ 12 valve amps * M-Audio Axiom Pro 49 & Air 32 MINI * PreSonus Speakers & Monitor Station V2 * Lenovo W520 laptop Type 427637U (32 GB RAM) with extra-Ports Dock * 3 TB Samsung SSDs * 3 Screens: 15.6” Laptop & 24” BENQ LED GL2450-B & Samsung 27” CT550 curved Monitor |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Initialize MC Transport device | Raynaldo Martine | Artist Series | 6 | 06-24-2020 03:00 PM |
Exclusive Control of Audio Device or Cannot Initialize Device | Alexlimbert | Pro Tools 12 | 4 | 10-22-2017 04:41 AM |
Pro tools 11 cannot initialize audio device | serstickman | Windows | 19 | 09-29-2014 08:32 PM |
Cannot initialize this playback device | firewired | Pro Tools M-Powered (Mac) | 2 | 01-15-2014 09:33 AM |
hitting play does nothing | CCash | Pro Tools TDM Systems (Mac) | 6 | 07-19-2005 09:23 PM |