|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Matching MixBus level with track channel during calibration.
Hi everyone et bonsoir de Paris !
I've been experiencing some strange readings when recalibrating my rig last night. I use an old Adat bridge (16bit) as my master output then go to a small mixer for listening. I have a pair of Dorrough meters (40-C2) and a DK MSD600 for monitoring levels. What I did first was pluging one of the Adat bridge's outputs directly into one Dorrough meter. The Adat bridge is calibrated to +4dBu using internal PT option. I've inserted Generator X plug for generating the Test tone on the master bus. I fed the meter with a -18dBFS, 1000Hz sine wave and adjust the trim pot to 0dB AVG. Then, by curiosity, I did the same technique, inserting the test tone in a track channel. Problem is the levels didn't match ! I've called Digi france today and the guy told me they are aware of this problem !!! Could someone explain this to me ? Dave, Nika ? Et merci d'avance ! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
003 Calibration Level | drummer9 | Pro Tools 9 | 0 | 06-30-2011 05:38 AM |
CALIBRATION LEVEL | Sput | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 3 | 10-20-2006 07:36 AM |
Level calibration | DonaldR | Tips & Tricks | 1 | 11-02-2004 08:31 AM |
Level matching problem | andre tchmil | Pro Tools TDM Systems (Mac) | 0 | 04-19-2001 12:39 AM |
level calibration | coaster | Tips & Tricks | 0 | 11-27-1999 08:57 AM |