|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
AV Hardware
Which Mac hardware is Audiovision compatible?
I presume 9600 Series. If so - any change in sight? What is the latest OS Version? |
#2
|
|||
|
|||
Re: AV Hardware
AudioVision PCI is supported on both the Mac 9500 and 9600, no change in sight. The latest supported Mac OS is 8.5.1. 8.0 and 8.1 are supported as well. 8.6 should be fine but I don't think any extensive testing has been done with it. Jon |
#3
|
|||
|
|||
Re: AV Hardware
Thanx Jon,
A while ago there was a rumour about 9600/250-300 (I think Mach 5), which could cause problems. True? And the other question which comes to mind: What about stock and/or spares? One more questions. I´ve been working recently on a PCI AV for the first time. Finally no wait on autosaves - the only problem still is disk performance (16 Fades at once). I´m not a PT crack but I think you can run your audio files on an UW-SCSI bus. After the disk I/O structure is PT now, would it be possible for AV, too? |
#4
|
|||
|
|||
Re: AV Hardware
I'm not sure about Mach 5 or even what that means, but there was some question about the 9600/350. The 350's were never fully qualified but I believe some preliminary or summarized testing may have been done. Despite this, there are many 9600/350s in the field running AudioVision so there shouldn't be any problems. As far as availability, they are definitely hard to come by these days and getting more dificult to find each day. You may want to talk to your local Digidesign dealer and/or Digidesign Sales Rep they will sometimes know of places to dig one up. I'm not totally clear on your drive question but maybe this will answer it... PCI AudioVision uses the Pro Tools III hardware for audio playback which consists of a Disk I/O card and a DSP farm. The Disk I/O has it's own narrow SCSI bus. It is possible to use wide drives on the narrow bus for audio playback if you want to but it requires the proper adaptor to do it. The proper adaptor should be included in the AV core kit. It is a cable, one foot or so in length, with a narrow connector on one end that attaches to the Disk I/O cable and a wide connector on the other end for wide drives. SCSI ID's above 6 cannot be used on wide drives when connected to the AV narrow audio SCSI bus and all other normal SCSI rules apply (ID's, termination, etc.). Also, if you are going to run wide drives on the audio SCSI bus you will probably want to make sure you are running Mt. Digi control panel version 1.4 (it can be downloaded here on the Digi website). The 1.4 version allows you to bump the scan time (at boot up) from 1000 ms to approx. 2500ms. You will need to do this if you have a wide drive(s) on the audio SCSI bus that are using SCSI ID's 0,1 or 2. Wide (and 10,000 spin drives?) drives require more time to be mounted by the narrow SCSI bus. If the drives are not mounted at boot up, you can launch Mt. Digi and hit the "mount" button to mount them manually. Probably more info that you wanted but I hope it answers your questions. thanks, Jon By the way, I'll be at AES in New York in a week or so (I'll be wearing a disguise...and a false name tag), I'm looking forward to rapping with alot of you in person... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'Unable to locate M-Audio hardware. Make sure your hardware is connected and turned o | roland342 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 10-29-2012 09:01 AM |
"Unable to locate M-Audio hardware. Make sure your hardware is connected and turned o | MerryD | Pro Tools SE and Essential (Win) | 8 | 08-02-2012 12:59 AM |
Unable to locate M-Audio Hardware. Make sure your hardware is connected and turned on | ytass | Pro Tools M-Powered (Win) | 4 | 11-25-2009 12:49 PM |
unable to locate m-audio hardware. make sure your hardware is..works fine in ableton? | pein | Pro Tools M-Powered (Win) | 2 | 10-07-2009 12:01 AM |
unable to locate M-Audio hardware. Make sure your hardware is connected and turned on | joskraus | Pro Tools M-Powered (Win) | 13 | 05-13-2009 09:05 AM |