|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Post Roll has stopped working???
Hi, just noticed after trying to do some punch-ins that my post roll has stopped working on both playback and record. The flags are at the top of the sequencer in the correct places, the pre roll works fine but the post roll refuses to play ball, any ideas.
Cheers OSX 10.4.9, 7.1cs3, Macbook 2.16
__________________
iMac i5 2.8GHz, Macbook Pro 2.4GHz, Pro Tools 10/11, MOTU 828mk2, Presonus Digimax FS, Presonus Firestudio Project, TC Konnekt 24D --- iCON Photography |
#2
|
|||
|
|||
Re: Post Roll has stopped working???
Anybody?
__________________
iMac i5 2.8GHz, Macbook Pro 2.4GHz, Pro Tools 10/11, MOTU 828mk2, Presonus Digimax FS, Presonus Firestudio Project, TC Konnekt 24D --- iCON Photography |
#3
|
||||
|
||||
Re: Post Roll has stopped working???
Check these steps... From Digi
" Setting Pre- and Post-Roll Pre- and post-roll times appear as flags in the ruler that represents the Main Time Scale. When pre- and post-roll are enabled, the flags are green, otherwise they are gray. Pre- and post-roll amounts can be entered in the Transport window, set from a track’s playlist or Timebase ruler, or by recalling a Memory Loca- tion. Setting Pre- and Post-Roll in the Transport Window Pre- and post-roll can be enabled and set in the Transport window. To set and enable the pre- and post-roll times in the Transport window: 1 Select View > Transport > Expanded. 2 In the Transport window, click in the pre-roll field. 3 Type in the pre-roll amount and press Forward Slash (/) on the numeric keypad to enter the value and automatically move to the post-roll field. 4 Type in the post-roll amount and press Enter to accept the new value. 5 To enable either pre- or post-roll, click the ap- propriate button so it is highlighted."
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
#4
|
|||
|
|||
Re: Post Roll has stopped working???
Thanks Park, it was in fact a momentary lapse of concentration, i haven't punched for while. I was forgetting to actually highlight the selection, i was just click straight on the session.
Duh
__________________
iMac i5 2.8GHz, Macbook Pro 2.4GHz, Pro Tools 10/11, MOTU 828mk2, Presonus Digimax FS, Presonus Firestudio Project, TC Konnekt 24D --- iCON Photography |
#5
|
||||
|
||||
Re: Post Roll has stopped working???
Right. It has happened to me. That's why I listed the steps. It is all so easy to forget one.
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
#6
|
||||
|
||||
Re: Post Roll has stopped working???
Right. It has happened to me. That's why I listed the steps. It is all so easy to forget one.
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pre-Roll / Post-Roll - Not working! | geelo | Pro Tools 9 | 12 | 07-30-2016 12:02 PM |
Pre and Post-Roll not working on D-Command | Hanswurstlsepp | ICON & C|24 | 3 | 11-08-2012 06:39 PM |
Pre-roll/post-roll appears to be broken in PT10 | anodecathode | macOS | 1 | 02-20-2012 01:33 PM |
Pre/Post Roll not working! | products7074740 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 02-20-2010 07:47 AM |
Auto Input not working with post-roll | bublabs | Pro Tools TDM Systems (Mac) | 0 | 08-02-2006 05:14 PM |