Error message CPU too slow (AAE-9173)
 

Just got mac osx im running 16gb with a terabyte drive and Im getting this error message telling me to de-activate or remove native plug-ins Im using. Is there a setting in preferences or something Im missing? Is there any solution to this issue.
Please help
Thanks

Re: Error message CPU too slow (AAE-9173)
 

Welcome to the Community

Start by reading this and re-post what we need regarding your system and setup to be able to help you.

http://duc.avid.com/showthread.php?t=300050

Christopher

Re: Error message CPU too slow (AAE-9173)
 

There is another thread on this issue. Two actually.
http://duc.avid.com/showthread.php?t=357286

Re: Error message CPU too slow (AAE-9173)
 

I got those errors when my card was inserted on wrong PCI-X. Not your case.
I goes you are using a firewire or usb audio card. are you using an internal firewire/usb port or an adapter (PCI-X to Firewire/usb, or something else) ? Did you had some other device installed on that port?
Try to use the port that is onboard, on the mainboard, not with a bracket...

Re: Error message CPU too slow (AAE-9173)
 

If you're trying to do this with a single hard drive (you stated A-as in one-terabyte hard drive) you're just asking for all kinds of errors. You need a dedicated secondary hard drive. From the MAC troubleshooting page:
http://duc.avid.com/showthread.php?t=54888
IMPORTANT! You MUST use a secondary hard drive (not your main OS drive) for recording and playback of audio in Pro Tools. Recording or playback from the OS drive is known to be problematic and the cause of many different error types. If you are using your system drive and encountering errors, the first thing you should do is get a compatible drive.

Pro Tools supports recording and playback to a secondary drive that meets the following requirements:

7200 rpm or faster
9ms seek time or faster

Please note that this has nothing to do with how LARGE the drive is. You STILL need a secondary drive if you want this to work correctly.