Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

Does anybody know if updating to from OS X 10.3.5 to OS X 10.3.6, can make Pro Tools LE 6.4 run again? In other words does 10.3.6 fix the bucks experienced in 10.3.5? - or do I have to upgrade to Pro Tools LE 6.7 to make my system work again?
I'm working on powerbook with MBox.
Oralet

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

i have heard 10.3.6 is even worse than 10.3.5 and the safe bet is still keep using 10.3.4

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

Hello Oralet,
don´t update to 10.3.6 it will not work !!!

good luck !

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

works fine here.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

Do you actually run Pro Tools LE 6.4 with MBox on a Powerbook with OS X 10.3.6.?
Didn't you have problems with OS X 10.3.5.?
Oralet

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

I am running 10.3.6 with PT LE 6.4 with absolutely noo problems or crashes.


Imac G5 1.6 1G Ram
MBOX
Event TR8

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

PTLE 6.7 ( and 6.4), 002R and mBox, dual 2.5 G5, 10.3.6. Internal drives. Solid.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

I just ordered a dual 2.5 ghz G5 a week ago, it's supposed to be in tomorrow. It's coming with 10.3.6, and I (will soon) have 6.4. Cliffy Boy, I sure hope you're right. Because if you aren't, I don't think theres any way I can downgrade if the OSX disc I get is 10.3.6.

I'll keep my fingers crossed.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

Dual 2GHz G5, 2.5GB RAM, 10.3.6, no problems with 6.4LE, and now no problems with 6.7cs2.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

here are ploblems i have had on 10.3.6 with pt6.4 cs9ed
loose my plugin settings
loose my midi setup
everything fixable, since then all fine.
before cs7 and cs9 when i deleted an audio region, like 3 steps of my history went away.
right now everythings working fine, haven't done lager than 30 minutes sessions.
did anyone does?

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.4.
 

Just upgraded to 10.3.6 an hour ago, and have run several PT LE 6.4 sessions with no problems so far.

It seems to work fine, no plugin setting lost, midi set up and running ok


Enjoy the music !

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

Nope, you can't downgrade once you are at 10.3.5. And I also could NOT get 6.4 to work on a new G5 with 10.3.5 installed on it. Had to wait until 6.7 came out. That said, I recommend getting up to 6.7 anyway. Lot of cool stuff, especially if you do MIDI or tempo related functions in PT at all. And the colors are nice too.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

Prockmat, I don't think you read my post right, but I actually said 10.3.6, not 3.5. Either way, you also said you couldn't get 6.4 to work on a G5 with 3.5 on it? Can you give me more specs on your computer setup? That doesn't seem right because just about everyone on this board says it works just fine, alone with many comments on this thread already!

I got my dual 2.5 G5 in today, and it shipped with 10.3.5. So I guees I'm safe, until Prockmat brought up that he couldn't get it to work. I'm concerned now...I won't get a chance to load up the system until this weekend, so we'll see I guess.

The sheer amount of bug complaints about 6.7 bothers me. Plus, the new feature list (aside from Beat Detective LE) doesn't look convincing enough to me.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

I upgraded to 10.3.6 and PTLE 6.2.2 still seems to be working for me. Should it be??? I'm not so sure I want to upgrade to 6.7 after reading this thread!
-Scott

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

Spicy, I confirm that dual 2,5Ghz G5 with 3.5 works fine with PT6.4.

That was my configuration until yesterday, when I upgraded to 3.6, and is still running fine with 6.4.

Now, like other fellow here, I wonder if I should install PT 6.7...

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

What I meant was that you can't downgrade lower than 10.3.5.

My scenerio was this... I was helping a friend install PT 6.4 on his new G5 which came loaded with 10.3.5. PT installed fine, opened fine, authorized fine... we could even open and play back sessions. But as soon as we tried to record, we would get DAE errors. PT would record about 3 secs of hash and then stop. Couldn't figure out why this was happening, as I'm running the exact same setup as my friend, except I was at 10.3.2. When we checked Digi's webpage, it said 6.4 wasn't approved for 10.3.5 and please continue to run 6.4 with 10.3.2. At that point I thought we'd try installing 10.3 onto his G5. That's when we found you can't downgrade past 10.3.5- without reformating the drive and starting over.

Happy ending to the story: 6.7 came out and now everything works with no problems. 6.7 is a great upgrade anyway, so I recommend getting there, even if you have to spend the bucks to do so.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

Sorry, I meant to comment on this as well. Most of the features in 6.7 are related to working with MIDI, so if you never deal with that, maybe it's not for you. But if you've ever tried to do tempo or meter mapping in PT, you want 6.7. Beat Detective LE is another great feature. The Undo history is a BIG deal- instead of trying to remember each step, it tells you and you can jump right to a certain undo point. The color coding seems like such a small thing when you just read it, but in practice it really helps organize things. And being able to effect tracks based on samples or ticks- very cool. Say you cut up a drum part with Beat Detective LE and chopped it at every quarter note. Now switch those tracks to tick based. Change the tempo and the drum part changes tempo- awesome. And if there is space between the regions, use the Trim to Fill Gaps option- even more awesome. I've also done some demos where the player just plays the piano part wild, not to a click or any tempo. I usually record the audio and the MIDI. If we later want to use that performance with a more fleshed out production, I can now take the MIDI information, establish tempo from the wild performance, then quantize or change as I want. There is no other program out there that I know of that can do this with a MIDI track. Always the midi data was tied to the tempo, whether or not you actually played to that tempo.

So the feature list of 6.7 was very convincing for me. Most of them I didn't understand how they would affect me until I got it and started using them.

Re: Compatibility: 0S X 10.3.6 and Pro Tools LE 6.
 

Well that was a very convincing (and inspirational) schpeel, bud. I think I might reconsider in that case. For now, I'm going to stick with what I've got until I absolutely need to upgrade. Bebause with every upgrade, the potential for disaster comes even closer. Thanks for all that thorough information!