Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools 10

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-23-2014, 02:36 AM
67Thunderbird 67Thunderbird is offline
Member
 
Join Date: Nov 2013
Location: Melbourne
Posts: 40
Default Live Recording Mackie 16 channels into 16 PT channels

I have recently started taking my MacBook Pro on the road along with a Focusrite 18i8. My aim was to record live straight into PT v10 and mix/ master at home in PT.
I have had some success but also encountered a few issues. I got some great signals directly from venue mixers RCA record out. But I'm relying on the house mixer so ideally I want my own signal. I tried using insert sends with the jack half in and I got a signal but if the gain staging is not right the signal strength is too low.
So my question. What Mixer will allow me to run single signals for each mixer channel directly into my Focusrite. Do I need a mixer with a designated line out per channel or could I still use the insert out provided I was controlling the gain ( use a splitter and take my own signals to my own mixer). I'm just trying to record live and mix in Pro tools. Currently looking at a Mackie CR1604-ZLZ 16.
If anyone has a tried and tested solution id be grateful.
__________________
Any assistance is greatly appreciated,
Thunderbird.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Not enough ASIO output channels available.at least 2 channels are needed. kudca Getting Started 1 05-26-2013 05:05 PM
Recording Only On 2 Channels blindside777 Pro Tools M-Powered (Mac) 0 01-10-2012 02:12 PM
clicks in recording on all channels JeffGT Pro Tools M-Powered (Win) 3 02-16-2008 03:29 AM
recording 8 channels at once? seneros 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 1 10-10-2006 11:53 PM
Recording on all eight channels on DIGI 002 calibos 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 4 09-22-2006 10:28 PM


All times are GMT -7. The time now is 06:39 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com