|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
TC System 6000 help needed
Sorry for OT but I think this is a place where I can get what I need.
Is anybody of you working with a 6000 MK2 mainframe and the icon CPU MK1 and still have the icon.cab firmware available?
__________________
www.srs-mastering.de Mac Pro 6.1-8core, OS 12.6, PT2023, HDX2, Sonnet Echo Express III-R, Madi Interface. |
#2
|
|||
|
|||
Re: TC System 6000 help needed
Hi Wolfgang,
I believe you can download firmware from TC Electronic here: https://www.tcelectronic.com/Categor...ogtrans(en|en) Last year I downloaded their firmware app to update software of a MkII mainframe with original black icon. The app installed versions appropriate for the hardware: TC Icon: 7.5.00 Frame: 6.50 DSP: 6.50 Ethernet SW: 8.10 I hope this helps.
__________________
system specs in profile |
#3
|
|||
|
|||
Re: TC System 6000 help needed
Yes this works if you have a black icon but with an remote CPU MK2 then you can do the upgrade but if you have CPU MK1 with the wrong firmware the MK2 mainframe is not seen by the remote CPU and there is no way to go around it.
I have to upgrade my remote CPU MK1 to a certain firmware without the icon.app that it works with the mainframe MK2 together. Therefore I need the 7.5 icon.cab file to do so. The icon makes no difference cause there is no MK2 except the other color for the housing.
__________________
www.srs-mastering.de Mac Pro 6.1-8core, OS 12.6, PT2023, HDX2, Sonnet Echo Express III-R, Madi Interface. |
#4
|
|||
|
|||
Re: TC System 6000 help needed
Have you started a support ticket with MusicTribe? I believe you can request one through the same TC Electronic website. They can be a little bit slow but at least there is still support for Sys6k.
Forgive me if I am repeating things you already know and have checked. You have 3 hardware units, 1.mainframe, 2.remoteCPU, 3.wired remote. Does the RemoteCPU communicate with the wired remote? If graphics appear on the wired remote then the answer is yes. Separately, does the downloadable software app on your computer control the mkII mainframe (with or without remoteCPU)? I sold my system and have forgotten much. I am thinking the mainframe and the RemoteCPU+wired remote can communicate even if software versions are different since RemoteCPU software update was always handled through the mainframe (even in old days when using floppy disks). The mainframe and RemoteCPU are both network devices and must have unique IP addresses, and probably should be on the same subnet (mask 255.255.255.0). Use crossed LAN cable wiring when connecting mainframe directly to remoteCPU, or regular network cables when both plugged into a standard network switch. You should be able to ping both the mainframe and the remoteCPU, no matter what versions of software are installed.
__________________
system specs in profile |
#5
|
||||||
|
||||||
Re: TC System 6000 help needed
Quote:
Quote:
Quote:
Quote:
Quote:
A MK1 remote CPU can only see a MK2 mainframe if it has a certain firmware (and vice versa). So you are not able to update a MK1 CPU through a MK2 mainframe if the CPU has not the right firmware. It just can be done with a shared folder from a host PC. And therefore you need the icon.cab file for updating the firmware (like in older days). But this file is not available from the MusicTribe web site, just icon.app files which doesn't work in this case. The original TC web site is not available anymore. Quote:
__________________
www.srs-mastering.de Mac Pro 6.1-8core, OS 12.6, PT2023, HDX2, Sonnet Echo Express III-R, Madi Interface. |
#6
|
|||
|
|||
Re: TC System 6000 help needed
I have found an Icon.cab file on a floppy disk but I think there is no chance it is a recent enough version to do what you want to do. Since it is on 3.5 inch floppy disk I am sure it was last used with my previous mkI mainframe, before being upgraded to mkII. I have opened the disk on an old Kurzweil sampler but have no easy way to read the file or version #. I have verfied the file is still readable, at least. If you are desperate to try, I may have a computer with a SCSI connector on its motherboard, maybe, so the floppy drive could be mounted to it. Then I could copy the file for you. Maybe I could just send you the disk.
I actually had very good experience with Music Tribe US support. After battery failure on my mkII, all license codes were lost including the mainframe, Unwrape, LM6, Backdrop, etc. It took many days with support but the codes were finally obtained from Denmark. I sold the system since then.
__________________
system specs in profile |
#7
|
|||
|
|||
Re: TC System 6000 help needed
Hello,
I've been trying to locate the Reverb 6000 Frame Firmware Update 4.02. Just picked up an additional used one and the unit keeps saying "New Version Required" It's currently at Frame SW Version: 4.00 Does anyone have a copy of this because I can't find it on the web after days of searching/ Please help. Thanks! Randy
__________________
Mac Pro Early 2009 3.06 Six Core 48gb ram, Pro Tools 10.3.10, HD6 Accel, Pro Tools 2021, Macbook Pro, Magma PE6R4i, Yamaha DM2000 Console, Logic 9 and 10, Apogee Big Ben, 10pcs HD 192's, Benchmark DAC-1, Distressors, API, Neve, Rupert Neve, Dangerous, Lynx, Manley ELOP+, Massive Passive, VariMu, Neumann, Peluso, A-Designs Hammer 2 & Nail, Empirical Labs, Drawmer, Lexicon U87, Bricasti M7, dbx, Cranesong, SSL 500 G-Bus, Custom Audio Germany, Dynaudio, Focal, Yamaha, TC Electronic, Mapex Drums, SPL |
#8
|
|||
|
|||
Re: TC System 6000 help needed
You should probably try calling TC.
__________________
Mac Pro 5,1. 3.46 12 core, 128 gigs ram, 580 GPU flashed Apple EMI, 3 monitors PT Ult 2023.6, OSX 10.14.6, 3 card PCI-e expansion with 3.2 USB Sonnet card. OCTO 8 card, Apollo 8 Quad, UAD quad satellite FW. Almost every plugin |
#9
|
||||
|
||||
Re: TC System 6000 help needed
I've sent you a PM with a download link...
Edit: oh, just noticed you need the Reverb 6000, I've sent the M 6000 files.... Not sure it matters.... |
#10
|
|||
|
|||
Re: TC System 6000 help needed
Out of curiosity, are TC 6000s still in regular use in post? Or have most moved to plugin solutions?
__________________
Pro Tools Ultimate 2024.3. OSX 13.6.5. Win 10. HD Native. Lynx AES16e. Lynx Aurora 16. i9-13900KF. ASRock Z690 Steel Legend. 64GB Ram. AMD Vega 64. BM Decklink. Dolby Atmos Renderer 5.2. Trinnov D-Mon. D-Command. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TC system 6000 w icon remote | studioj11 | Buy & Sell | 0 | 10-28-2014 10:43 PM |
Unwrap PT <-> tc System 6000 | thierryd | Post - Surround - Video | 3 | 03-05-2007 11:53 PM |
Who have tried the TC system 6000 TDM plugins? | kinghand | Pro Tools TDM Systems (Mac) | 9 | 09-13-2005 09:38 AM |
TC System 6000 | Ulfius | Pro Tools TDM Systems (Mac) | 10 | 11-13-2002 05:57 AM |
TC System 6000 and PT? | PTstress | Pro Tools TDM Systems (Mac) | 2 | 08-17-2001 08:11 PM |