|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Level matching problem
I use the lightpipe from the adatbridge to an adatcard in my yamaha 03D.this works well for track laying,but as soon as I start mixing and raise the master level,say around-2dB ,the input(channel 1-2 from the adatcard)starts clipping,indicated by the tiny meters on
the 03,and also in the monitors.It's gets even worse when I do prepare a CD master with really hot levels(-0.02dB).My solution is to use the analog outs from the bridge and going into the analog stereo in on the 03. This is unpractical and not representative to hear what is going on.PT5.1 with 16 bit sessions.Adatbridge 16 bit. Tips please. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The Matching Criteria List and Matching Playlists | EricWillhelm | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 01-13-2009 01:35 PM |
Automation problem with and between matching break points | crizdee | Pro Tools TDM Systems (Mac) | 18 | 08-20-2008 05:01 PM |
out put level problem | billymackmusic | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 02-28-2007 11:37 AM |
Matching MixBus level with track channel during calibration. | ODC | Pro Tools TDM Systems (Mac) | 0 | 02-26-2002 10:51 AM |
Tempo matching - problem | India001 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 06-13-2001 05:58 AM |