Avid Pro Audio Community
How to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support
|
|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
#1
09-15-2010, 11:13 AM
|
|||
|
|||
BUG - ProFire 2626 with M-Powered
On my ProFire 2626 I'm able to route all my 16 ADAT channels through the ProFire control panel and directly hear everything so I know they are working properly.
Unfortunately in ProTools M-Powered the audio on channels 19-26 is not coming through. Even when I configure the I/O differently there is still no audio.  So right now my setup should have 26 inputs but it's being limited to 18. Please help... Any ideas? Thanks! ~J 
|
|
#2
09-15-2010, 11:20 AM
|
|||
|
|||
|
Re: BUG - ProFire 2626 with M-Powered
That's not a bug. Pro tools-powered is limited to only 18 channels.
|
|
#3
09-15-2010, 05:00 PM
|
|||
|
|||
|
Re: BUG - ProFire 2626 with M-Powered
Hi JVonD,
The official line is that PT M-Powered (and I think LE too) only supports 18 channels, BUT I have managed to get my system (using Delta 1010s) to record 30 channels simultaneously. I don't know if this will work with a firewire interface but if you could try it may help more of us: Go to Tools-> I/O -> Input and click default. How many channels appear?
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| M-Powered 8 BUG - ProFire 2626 - VID | JVonD | Pro Tools M-Powered (Win) | 3 | 10-21-2010 07:01 PM |
| help with profire 2626 in m-powered 8 | docterzaius | Pro Tools M-Powered (Win) | 1 | 07-27-2010 09:24 PM |
| M-Powered with Profire 2626 as ADAT | steve3186 | Pro Tools M-Powered (Mac) | 11 | 05-02-2010 07:51 AM |
| Profire 2626 and M-Powered 8 | acq1 | Pro Tools M-Powered (Mac) | 9 | 03-10-2009 11:02 PM |
| M-Powered 7.4 Cannot Find Profire 2626 | djad05 | Pro Tools M-Powered (Win) | 11 | 11-21-2008 09:34 AM |
Linear Mode
